Default Equipment IDs

The following tables show the default format for the Equipment ID field. The NetAdapterMspEAExport_Equipment.xsl style sheet determines the format of the Equipment IDs. The MultiSpeak field that holds the Equipment ID for devices is eaEquipment. You may modify the style sheet to change the Equipment ID format (see Modify EquipmentID Format).

SwitchUnit

SwitchUnit	Default Format
subtype OH	<maxContinuousAmp>_OH_SWI
subtype UG	<maxContinuousAmp>_UG_SWI
other subtypes	<maxContinuousAmp>_SWI
Note for Milsoft Windmil Users: Milsoft Windmil does not model switch equipment IDs and therefore does not support importing them. As of version 7.01, Windmil does not read equipment IDs for switches.

FuseUnit

FuseUnit	Default Format
subtype OH	<LinkRtg><FuseType>_OH_FUS
subtype UG	<LinkRtg><FuseType>_UG_FUS
other subtypes	<LinkRtg><FuseType>_FUS

DynamicProtectiveDeviceUnit

DynamicProtectiveDeviceUnit	Default Format
subtype breaker	<maxContinuousAmp>A_CB
subtype recloser	<maxContinuousAmp>A_REC
subtype sectionalizer	<maxContinuousAmp>A_SEC
other subtypes	<maxContinuousAmp>A

TransformerUnit

TransformerUnit	Default Format
phasingCode AB, BC or AC	2PH_<RatedKVA>
phasingCode A, B or C	1PH_<RatedKVA>
phasingCode ABC	3PH_<RatedKVA>

RegulatorUnit

RegulatorUnit	Default Format
phasingCode AB, BC or AC	2PH_<OperVolt>
phasingCode A, B or C	1PH_<OperVolt>
phasingCode ABC	3PH_<OperVolt>

Conductors

Similar to devices, conductors also have an equipment type. Conductors have one to three phase lines and zero or one neutral line. The MultiSpeak field for phase line types is called "conductorType". The MultiSpeak field for neutral line types is called "condN". The information for the phase conductor types comes from the related ConductorInfo record, and the information for the neutral type is stored on the conductor feature. Below are the default formats for conductor equipment types.
Conductor	Default Format
ConductorInfo - phase lines - conductorType:	<CondSize>_<CondMatl>
Conductors - neutral line - condN:	<NeutSize>_<NeutType>