Upgrade to 9.3 Rev2

The login used to run the Fiber Stand Alone Conversion Tool MUST be the database owner and must own all domains.
Because the upgrade includes changes to the data model (i.e., new fields), the upgrade may require you to re-create all existing favorites.
If you are upgrading Fiber Manager from a release previous to 9.3 Rev2 and have already performed the steps listed in the table below, you do not need to perform them again. The Fiber Stand Alone Conversion tool automatically makes your database compatible with the most recent version of Fiber Manager.

The 9.3 Rev2 release of Fiber Manager supports a flexible data model. If you are upgrading directly from 9.3 Rev2, refer to the various combinations of installations to locate your particular installation and follow the steps indicated.

Geodatabase Type: SDE
Follow these steps:
1. Verify Configuration This is an important step. Skipping it could result in the failure of the next step.
2. Add Relationships
3. Fiber Stand Alone Conversion Tool
4. Setting Default Values
5. Assign Relationship Autoupdater

Geodatabase Type: Access (.mdb)
Follow these steps:
1. Verify Configuration This is an important step. Skipping it could result in the failure of step 3.
2. Add Relationships
3. Adding Global IDs
4. Fiber Stand Alone Conversion Tool
5. Setting Default Values
6. Assign Relationship Autoupdater