Collapse All Expand All

Version: 10.2.1c and 10.2.1c SP3

Resource Center Home

Define Subsources

If you are using Subsources, then Feeder Manager 2.0 requires that you designate certain point feature classes of your choice as Subsources. There are various ways to do this, and Option 1 is the fastest.

Option 1: Update Subsources

First, set all existing Feeder Manager sources as Subsource. The autoupdaters you assigned earlier will write all of these sources to the CircuitSourceID table and define them as UltimateSources as necessary.

1. Open ArcMap and begin an editing session.
2. Use the Locator tool to select all existing Feeder Manager sources (e.g., CircuitBreakers).
3. Select the feature class (e.g., DynamicProtectiveDevice for CircuitBreakers) on the List by Drawing Order tab of the TOC. Right-click and select Open Attribute Table.
4. Right-click the Subsource column and select Field Calculator. Set the Subsource value to 1 (Yes). This is not required on ultimate source features.
5. Close the Selected Attributes window.
6. Repeat steps 2-6 for all features that may be designated as Subsources.
7. Save Edits.

Option 2: Define an Ultimate Source Upstream of Current Circuit Source

If you wish to define an ultimate source upstream of an existing circuit source, follow the steps below.

1. In ArcMap, select the circuit source(s) downstream of the ultimate source feature(s).
2. Delete the CircuitSource relationship on each selected feature. This removes them from the CircuitSource table.
3. Select the features to be designated as ultimate sources.
4. Create a relationship with the CircuitSource table on each ultimate source feature.

Define Ultimate Sources 

By default, Feeder Manager 2.0 defines your ultimate sources as the most upstream devices in the network.

Option 1: Do Nothing

If you have assigned all autoupdaters as prescribed in this section, the autoupdaters will fire and determine the ultimate sources for you.

Option 2: Define an Ultimate Source Upstream of Current Circuit Source

If you wish to define an ultimate source upstream of an existing CircuitSource, you will need to follow the steps below. Any feature with one of the following model names can be recognized as an ultimate source, provided it is a junction feature that participates in the electric network and it has a related row in the Circuit Source table (step 4 below).

Follow these steps to define an ultimate source. Note that the feature class must have one of the above model names assigned.

1. In ArcMap, select the CircuitSource(s) downstream of the ultimate source feature(s).
2. In Attribute Editor, delete the CircuitSource relationship on each selected feature. This removes them from the CircuitSource table.
3. Select the features to be designated as ultimate sources.
4. Create a relationship with the CircuitSource table on each ultimate source feature.

 

 

---

Send Comment to ArcFMdocumentation@schneider-electric.com