By default, Network Adapter uses the geometric shape length to populate the conductor's condLength field in the exported XML. In this case the MeasuredLength field does not require a value or the MEASUREDLENGTH model name. You can choose to use the measured length value instead. In this case the MeasuredLength field must have a valid value and must have the MEASUREDLENGTH model name assigned.

To use the length measured in the field, follow the steps outlined below.

1. In the geodatabase, add a field for the measured length to the conductor feature class (if one doesn't already exist). This field must have a Numeric data type.
2. Assign the MEASUREDLENGTH field model name to this field using the ArcFM Properties Manager.
3. Open NetworkAdapter.exe.config. By default this file is installed here: C:\Program Files (x86)\Miner and Miner\ArcFM Solution\Bin.
4. Identify the connection configuration you're currently using. This is discussed on the Configuration File page in this section.
5. Look for the <FieldModelNames> section and add the MEASUREDLENGTH field model name to this section.

    

   	Copy Code
   <FieldModelNames> <add name="MEASUREDLENGTH"/> <add name="CIMFIELD" /> </FieldModelNames>

    

6. Save and close NetworkAdapter.exe.config.

 If this field is Null, then Network Adapter will use the geometric shape length instead.

Send Comment to ArcFMdocumentation@schneider-electric.com