Configuring Responder
Restart Services via Notify Network Change Button
Version: 10.2.1c and 10.2.1c SP3 |
| Responder Overview > Implement Responder > Configure Responder > Responder Server > Responder Windows Service > Restart Services via Notify Network Change Button |
Staggering the restart of services via the Notify Network Change button allows you to restart Responder services after an Esri replication, without experiencing any downtime. This configuration setting is enabled by default.
Additional settings, outlined below, are available if you browse to and open the Responder Windows Server config file (Miner.Responder.WindowsServer.exe.config) at this location: C:\Program Files (x86)\Miner and Miner\Responder\Server\. You can edit the file by opening it in an XML application (such as XML Spy) or by opening it in a simple text editing program (such as Notepad).
To turn off staggered restart, change the key's value to false:
If this key does not exist in the configuration, then services are restarted.
Use of the settings below depends upon either the StaggeredRestart.Enabled key being set to true, or the key being omitted from the config file.
To use multicast, set the key's value to the IP and port of your Data Services Configuration:
To split services into multiple groups, change the key's value to a number greater than the default of 2:
To change the time between restarts, set the key's value to 00:10:00, for example (this indicates that the minimum restart time is 10 minutes):
After the 10-minute window, Restart Network is issued successfully. If this value does not exist in the configuration, the default is 30 minutes.
