Edit Current Hazard

With an incident open on the Current Task pane, you can select an existing hazard and edit it. The Edit Current menu allows you to delete a hazard or edit its details.

Open an incident on the Current Task pane and select the Devices tab.
Select a device in the Hazards table and click the Edit Current button. Select an option:

Details

Select Details to view data related to the incident device. The image below shows the device details. This information may be edited.

Hazard Type: Indicate the hazard (e.g., broken pole, wires down).

Status: Indicates whether the hazard has been secured.

Wire Owner: The owner of the wire.

Remarks: Enter any relevant remarks.

Time Created: Time the hazard was created.

Time Secured: Time the hazard was secured.

Time Completed: Time the hazard was eliminated.

Time Public Safety Arr.: Time public safety arrived.

Time Public Safety Rel.: Time public safety was released.

Region: This field displays the region in which the hazard resides. This value cannot be edited in the field.

SubID: This field displays the segment ID for a complex edge. It is populated only for cuts. This value cannot be edited in the field.

Delete

Delete is enabled only on hazards that were added in the field. You may not delete a hazard that was added to an incident by a dispatcher on the Enterprise. Select a hazard that was added in the field and select Delete from the Edit Current list. The selected hazard is removed from the Hazards table.