Edit Current Location Feature

With an incident open on the Current Task pane, you can select an existing location feature and edit it. The Edit Current menu allows you to delete a location feature, create a hazard, or edit its details.

Open an incident on the Current Task pane and select the Devices tab.
Select a device in the Location Features table and click the Edit Current button. Select an option:

Details

Select Details to view data related to the location feature. The image below shows the device details. This information may not be edited.

Remarks: Enter any relevant remarks.

Region: This field displays the region in which the device resides. This value cannot be edited in the field.

SubID: This field displays the segment ID for a complex edge. It is populated only for cuts. This value cannot be edited in the field.

Make Hazard

Use this tool to add a hazard to the selected feature. Enter values for the following fields as they are pertinent:

Hazard Type: Indicate the hazard (e.g., broken pole, wires down).

Status: Indicate whether the hazard has been secured.

Wire Owner: Select an owner of the wire.

Remarks: Enter any relevant remarks.

Time Created: Time the hazard was created.

Time Secured: Time the hazard was secured.

Time Completed: Time the hazard was eliminated.

Time Public Safety Arr.: Time public safety arrived.

Time Public Safety Rel.: Time public safety was released.

Region: This field displays the region in which the hazard resides. This value cannot be edited in the field.

SubID: This field displays the segment ID for a complex edge. It is populated only for cuts. This value cannot be edited in the field.

Click OK to save changes. A new entry will appear in the Hazards list.

Delete

Delete is enabled only on location features that were added in the field. You may not delete a location feature that was added to an incident by a dispatcher on the Enterprise. Select a location feature that was added in the field and select Delete from the Edit Current list. The selected location feature is removed from the Location Features list.