Edit Current Device

With an incident open on the Current Task pane, you can select an existing device and edit it. The Edit Current menu allows you to restore, change or delete a device. You may also create a hazard on the selected device or view its details.

Open an incident on the Current Task pane and select the Devices tab.
Select a device in the Electric Devices list and click the Edit Current button. Select an option:

Restore

Select Restore to set the devices Actual Status back to its Expected Status. In the Restoration window, click the Phase Operation icon to change the status for that phase. Set the date and time for the device restoration. By default, the date and time are set to the date/time that you clicked the Phase Operation icon. Edit these values as necessary. Click Apply to save changes and retain the window. Click OK to save changes and dismiss the window. Click Cancel to dismiss the form without saving changes.

When the Status is set to Completed, the task is removed from the field crew's Incidents page.

Change

This tool is only available on unconfirmed incidents. It allows you to move an incident from one device to another. You may want to zoom the map display to the new device first. Select a device in the Electric Devices window and choose this tool from the Edit Current field. The cursor changes and allows you to snap to a device to replace the once selected in the Electric Devices section.

Details

Select Details to view data related to the incident device. The image below shows the device details. This information may not be edited.

Expected Status: This field displays the expected status of the device. This value cannot be edited in the field.

Actual Status: This field displays the actual status of the device.

Device Operation: This field displays the type of operation performed on the device (e.g., fault). This value cannot be edited in the field.

Time of Operation: The time that the device was operated or the time the fault occurred.

# Cust.: This field displays the number of customers impacted by the outage. This value cannot be edited in the field.

# Crit. Cust.: This field displays the number of critical customers impacted by the outage. This value cannot be edited in the field.

# Priority Cust.: This field displays the number of priority customers impacted by the outage. This value cannot be edited in the field.

Region: This field displays the region in which the device resides. This value cannot be edited in the field.

Substation: This field displays the substation that feeds the device. This value cannot be edited in the field.

Feeder ID: This field displays the FeederID for the device. This value cannot be edited in the field.

Make Hazard

Use this tool to add a hazard to the selected device. Enter values for the following fields as they are pertinent:

Hazard Type: Indicate the hazard (e.g., broken pole, wires down).

Status: Indicate whether the hazard has been secured.

Wire Owner: Select an owner of the wire.

Remarks: Enter any relevant remarks.

Time Created: Time the hazard was created.

Time Secured: Time the hazard was secured.

Time Completed: Time the hazard was eliminated.

Time Public Safety Arr.: Time public safety arrived.

Time Public Safety Rel.: Time public safety was released.

Region: This field displays the region in which the hazard resides. This value cannot be edited in the field.

SubID: This field displays the segment ID for a complex edge. It is populated only for cuts. This value cannot be edited in the field.

Click OK or Apply to save changes. A new entry will appear in the Hazards list below Electric Devices.

Delete

Delete is enabled only on devices that were added in the field. You may not delete a device that was added to an incident by a dispatcher on the Enterprise. Select a device that was added in the field and select Delete from the Edit Current list. The selected device is removed from the Electric Devices table.