Collapse All Expand All

Version: 10.2.1b and 10.2.1b SP1

Resource Center Home

Use the ArcFM Properties Manager to assign model names. You may omit specific feature classes from Gas traces. To do this, assign the GASNONTRACEABLE model name to the Feature Class and the ArcFM Gas NonGas Trace Weight AU to the GasTraceWeight field of the feature class.

 

ControllableFitting and NonControllableFitting

Controllable Fitting and NonControllable Fitting features may participate in a Cathodic Protection trace. These feature classes are NOT required for the Cathodic Protection tracing to work (however, the DistributionMain feature class is required).

Model Names: CONTROLFITTING and/or NONCONTROLFITTING

 

Field Model Names:

One feature class can represent both control and noncontrol fitting types if your data model breaks this out at the subtype level. In this case, assign both model names to the feature class.

Field	Field Model Name
BondedIndicator	BONDEDINDICATOR
EmerIsolationSysStatus	EMERISOLATIONSYSSTATUS
GasPressureSystemStatus	GASPRESSURESYSTEMSTATUS
GasSystemStatus	GASSYSTEMSTATUS
GasTraceWeight	GASTRACEWEIGHT
InsulatedIndicator	INSULATEDINDICATOR
Material	MATERIAL
NormalPosition	NORMALPOSITION

 

CP Anode

Model Names: GASNONTRACEABLE

 

Field Model Names:

Field Name	Field Model Name
GasTraceWeight	GASTRACEWEIGHT
InserviceDate	INSERVICEDATE
Description	DESCRIPTION

 

CP Bond Junction

Model Names: GASNONTRACEABLE (assign if you want traces to stop at junctions)

 

Field Model Names:

Field Name	Field Model Name
GasTraceWeight	GASTRACEWEIGHT

 

CP Bond Wire

Model Names: GASNONTRACEABLE

 

Field Model Names:

Field Name	Field Model Name
GasTraceWeight	GASTRACEWEIGHT

 

CP Rectifier Cable

Model Names: GASNONTRACEABLE

 

Field Model Names:

Field Name	Field Model Name
GasTraceWeight	GASTRACEWEIGHT

 

CP Rectifier

Model Names: RECTIFIER

 

Field Model Names:

Field Name	Field Model Name
GasTraceWeight	GASTRACEWEIGHT
Amps	AMPS
Volts	VOLTS
InserviceDate	INSERVICEDATE
Description	DESCRIPTION

 

CP System

Model Names: CPSYSTEM

 

CP Test Point

Model Names: GASNONTRACEABLE, TESTPOINT

 

Field Model Names:

Field Name	Field Model Name
GasTraceWeight	GASTRACEWEIGHT
InserviceDate	INSERVICEDATE
Description	DESCRIPTION

 

Distribution Main

Model Names: DISTRIBUTIONMAIN, SPLITTARGET, PIPE, CPPIPE, GASNETWORKEDGE

 

Field Model Names:

Field Name	Field Model Name
BondedIndicator	BONDEDINDICATOR
CPSystemStatus	CPSYSTEMSTATUS
Diameter	PIPEDIAMETER
GasTraceWeight	GASTRACEWEIGHT
InsulatedIndicator	INSULATEDINDICATOR
Material	MATERIAL
OperatingPressure*	OPERATINGPRESSURE
PipeStausIndicator	PIPESTATUSINDICATOR
PipeType	PIPETYPE

 

* The Valve Isolation trace reads the operating pressure from one of two places. If neither of these places is configured properly or a value doesn't exist, the Valve Isolation trace will fail. The operating pressure may be stored in a field on the pipe feature. In this case the OPERATINGPRESSURE model name must be assigned to this field. Alternatively, you can store the operating pressure in an Operating Pressure table that is related to the pipe feature class (e.g., DistributionMain). In this case the OPERATINGPRESSURE model name must be assigned to the Operating Pressure table, and the table must be related directly to the pipe feature.

SNAPPING: The SqueezeOff feature class snaps to DistributionMain. Use the PipeType field to indicate whether the pipe is pinchable. The SqueezeOff feature class and PipeType field are used by the Squeeze Off trace (NOT Valve Isolation).

 

 

Gas Valve

Model Names: VALVE

 

Field Model Names:

Field Name	Field Model Name
BondedIndicator	BONDEDINDICATOR
CPSystemStatus	CPSYSTEMSTATUS
EmerIsolationSysStatus	EMERISOLATIONSYSSTATUS
GasPressureSystemStatus	GASPRESSURESYSTEMSTATUS
GasSystemStatus	GASSYSTEMSTATUS
GasTraceWeight	GASTRACEWEIGHT
InsulatedIndicator	INSULATEDINDICATOR
Material	MATERIAL
NormalPosition	*NORMALPOSITION
OperatingClassification	OPERATINGCLASSIFICATION

*Assign the NORMAL POSITION field model name to the field that the Gas System and Valve Isolation traces should look at to determine whether the valve is opened or closed. For example, you may wish these traces to look at the Present Position field instead of the Normal Position field.

 

Regulator Station

Model Names: REGULATOR

 

Field Model Names:

Field Name	Field Model Name
CPSystemStatus	CPSYSTEMSTATUS
EmerIsolationSysStatus	EMERISOLATIONSYSSTATUS
GasPressureSystemStatus	GASPRESSURESYSTEMSTATUS
GasSystemStatus	GASSYSTEMSTATUS
GasTraceWeight	GASTRACEWEIGHT
SOPIn	SOPIN
SOPOut	SOPOUT
Status	STATUS

 

Service

Model Names: SERVICE, PIPE, CPPIPE, GASNETWORKEDGE

 

Field Model Names:

Field	Field Model Name
BondedIndicator	BONDEDINDICATOR
CPSystemStatus	CPSYSTEMSTATUS
Diameter	PIPEDIAMETER
GasTraceWeight	GASTRACEWEIGHT
InsulatedIndicator	INSULATEDINDICATOR
Material	MATERIAL
MeasuredLength	MEASUREDLENGTH
OperatingPressure*	OPERATINGPRESSURE

* The Valve Isolation trace reads the operating pressure from one of two places. If neither of these places is configured properly or a value doesn't exist, the Valve Isolation trace will fail. The operating pressure may be stored in a field on the pipe feature. In this case the OPERATINGPRESSURE model name must be assigned to this field. Alternatively, you can store the operating pressure in an Operating Pressure table that is related to the pipe feature class (e.g., DistributionMain). In this case the OPERATINGPRESSURE model name must be assigned to the Operating Pressure table, and the table must be related directly to the pipe feature.

 

Squeeze Off

Model Names: SQUEEZEOFF

 

Field Model Names:

Field	Field Model Name
GasTraceWeight	GASTRACEWEIGHT
NormalPosition	NORMALPOSITION

(The NormalPosition field should be open by default.)

 

Town Border Station

Model Names: TBS

 

Field Model Names:

Field Name	Field Model Name
EmerIsolationSysStatus	EMERISOLATIONSYSSTATUS
GasTraceWeight	GASTRACEWEIGHT
GasPressureSystemStatus	GASPRESSURESYSTEMSTATUS
GasSystemStatus	GASSYSTEMSTATUS
SOPIn	SOPIN
SOPOut	SOPOUT
Status	STATUS

 

 

 

---

Send Comment to ArcFMdocumentation@schneider-electric.com