Responder Mobile Using Guide
Edit Current Location Feature
| Responder Mobile Overview > Current Task > Devices Tab > Edit Current Location Feature |
With an incident open on the Current Task pane, you can select an existing location feature and edit it. The Edit Current menu allows you to delete a location feature, create a hazard, or edit its details.
Select Details to view data related to the location feature. The image below shows the device details. This information may not be edited.
Remarks: Enter any relevant remarks.
Region: This field displays the region in which the device resides. This value cannot be edited in the field.
SubID: This field displays the segment ID for a complex edge. It is populated only for cuts. This value cannot be edited in the field.
Use this tool to add a hazard to the selected feature. Enter values for the following fields as they are pertinent:
Hazard Type: Indicate the hazard (e.g., broken pole, wires down).
Status: Indicate whether the hazard has been secured.
Wire Owner: Select an owner of the wire.
Remarks: Enter any relevant remarks.
Time Created: Time the hazard was created.
Time Secured: Time the hazard was secured.
Time Completed: Time the hazard was eliminated.
Time Public Safety Arr.: Time public safety arrived.
Time Public Safety Rel.: Time public safety was released.
Region: This field displays the region in which the hazard resides. This value cannot be edited in the field.
SubID: This field displays the segment ID for a complex edge. It is populated only for cuts. This value cannot be edited in the field.
Click OK to save changes. A new entry will appear in the Hazards list.
Delete is enabled only on location features that were added in the field. You may not delete a location feature that was added to an incident by a dispatcher on the Enterprise. Select a location feature that was added in the field and select Delete from the Edit Current list. The selected location feature is removed from the Location Features list.
