FiberToolbarName:Fiber Manager
CircuitSchematic:Circuit Schematic
CircuitSchematicGenerate:Circuit Schematic Generate
CircuitSchematicUpdate:Circuit Schematic Update
Disconnect:Disconnect
ShowConnection:Show both sides of connection
PointArgumentError:PointArgumentError
Value:Value
NotAnInt:NotAnInt
Left:Left Data Grid Null
Right:Data Grid Null
SimpleError:Error :
SimpleErrorStackTrace:The error occured in:
SpliceSchematicUpdate:Splice Schematic Update
SpliceSchematicGenerate:Splice Schematic Generate
ClassModelNameError:Class Model Name Error
IndexRetrievalError:Index Retrieval Error
TableSetErrorTitle:Table set error
SetRackAndPanelsError:Unexpected error in SetRackAndPatchPanelTables. The Error was ( Please screen shot this error. ):
IncorrectViewError:Must be in ArcMap data view
WrongViewTitle:Wrong View
FieldModelNameError:Field Model Name Error
Tray:Tray:
ApplyFailurePrefix:Apply failed. Please screen shot the following message. Exception:
ApplyFailureSuffix:Stack trace:
ConnectionWriteErrorTitle:Connection write error
ToFewObjectsError:There must be at least two objects connected to this point
ToFewObjectsErrorTitle:Too few connected objects
Apply:Apply
Update:Update
C:C
Close:Close
ModelNameErrorTitle:Model Name Error
GetPatchPanelsError:Unexpected error in GetPatchPanels.\nThe Error was ( Please screen shot this error. ):
SelectAtLeastOneError:You must select one fiber object prior to opening Circuit Manager to use this function.
SelectAtLeastOneErrorTitle:No start point selected
SelectOnlyOneError:Only one fiber object at a time may be selected.
SelectOnlyOneErrorTitle:Too many selected objects
ConduitFeaturePrefix:Conduit feature:
ConduitFeatureSuffix:failed to initialize. Exiting connection manager.
SheathFeaturePrefix:Sheath feature:
SheathFeatureSuffix:failed to initialize. Exiting connection manager.
SheathInitializeErrorTitle:Sheath Initialize Error
SelfLoopingConnectionError:You cannot connect an object to itself.
SelfLoopingConnectionErrorTitle:Self Looping Connection
SplitterToSplitterError:You cannot connect a splitter port directly to a splitter port. There must be a piece of fiber between them.
SplitterToSplitterTitle:Splitter to splitter error
ModelNameError1:Error thrown trying to obtain the class with the model name:
ModelNameError2:The error was:
ModelNameError3:Error thrown trying to obtain field mode name:
ModelNameError4:from class
DuplicateName:is a duplicate name. All items appearing in the connection manager must have a unique name. Please rename the item and try again.
DataTableAddErrorTitle:Data table add error
DeleteCorruptConnection:Delete Broken Connection
TerminateConduit:Terminate Tube
OpenConduit:Open Tube
DuplicateCircuitTitle:Duplicate Circuit
DuplicateCircuit:You cannot change a circuit name to another circuit name that already exists.
NullCircuit:Circuit Name cannot be blank.
NullCircuitTitle:Null Circuit
UpdateCircuit:Update Circuit
ConnectionManagerCaption:Connection Manager
ConnectionManagerMessage:Use this tool to view, create or edit fiber connections such as splices between fibers and connections to fibers and equipment.
ConnectionManagerTooltip:Connection Manager
UpdateTrayTooltip:Update tray on selected connection(s).
UpdateLossATooltip:Update loss A on selected connection(s).
UpdateLossBTooltip:Update loss B on selected connection(s).
UpdateSpliceTypeTooltip:Update splice type on selected connection(s).
UpdateAllTooltip:Update all connection properties on selected connection(s).
DisconnectTooltip:Disconnect selected connection(s).
AutoconnectTooltip:Connect all connection(s) straight through.
ApplyTooltip:Apply changes.
OKTooltip:Apply changes and close form.
CancelTooltip:Exit without saving changes.
CircuitManagerCaption:Circuit Manager
CircuitManagerMessage:Use this tool to view and manage circuit information by creating and editing circuits associated with an end-to-end path in the fiber network.
CircuitManagerTooltip:Circuit Manager
FiberManagerName:Fiber Manager
UnitsLabel:Fiber Units:
CircuitGroupPrefix:Circuit Group:
CircuitManager:Circuit Manager
CircuitMode:Circuit Mode
CircuitPrefix:Circuit:
CreateFiberTraceReport:Create Fiber Path Trace Report.
CreateNewCircuit:Create new circuit
Delete:Delete
EditExistingCircuit:Edit existing circuit
Trace:Trace
Select:Select
TraceClear:Clear
TraceToolTip:Trace selected circuit.
SelectToolTip:Select the origin port for the new circuit.
ClearToolTip:Clear traced circuit.
UpdateToolTip:Update circuit attributes.
DeleteToolTip:Delete selected circuit.
ZoomToTraceSelection:Auto Zoom to selection on Trace.
DeleteCircuit:Are you sure you want to delete this circuit?
DeleteCircuitTitle:Deleting Circuit.
FiberLayerErrorTitle:Fiber Layers not Found.
FiberLayerError:There are no Fiber Layers in the map to use this tool.
ConflictToolToolTip:Fiber Connection Conflict Resolution
ConflictToolMessage:Use this tool to display and resolve conflicts among fiber connections within a versioned SDE geodatabase.
ConflictToolCaption:Fiber Connection Conflict Resolution
Continuous:Continuous
Fusion:Fusion
Glue:Glue
Mechanical:Mechanical
DeleteMenuItemTitle:Delete
FavoritesNodeTitle:Favorites
LocationEditorPendingEditsMessage:You have pending edits. Would you like to save them to the database before exiting? Choosing 'Yes' will save your edits. Choosing 'No' will disgard them.
LocationEditorPendingEditsTitle:Pending Edits
LocationEditorTitle:Location Editor
LocationEditsEditUndoMessage:Location edits written to database
EditsNotEnabledErrorTitle:Edits not enabled
ToolRequiresEditSession:You must be in an edit session in order to use this tool.
LossALabel:Loss 1310:
LossBLabel:Loss 1550:
FiberTraceSchematicCommand:Fiber Trace Schematic
FiberTraceSchematicMessage:Create a schematic diagram based on a fiber trace.
FiberTraceSchematicTooltip:Fiber Trace Schematic
FeaturesAndConnectionsSuccessfullyCreated:Objects placed and connected successfully.
ObjectsPlacedAndConnected:Objects Placed and Connected
CircuitManagerCircuitNameLabel:Circuit: {0} 0 = name of the circuit
CircuitManagerReadOnlyMode:(Read-only mode) text appended to form title to show that it is in read-only mode
CircuitManagerListItemShowAll:<show all> string to display in our list controls when the option displays all options.
ConnectionFormCircuitNameHintCaption:Circuit Name: {0} 0: circuit name Hint used to display which circuit is currently highlighted
ConnectionFormUndeterminedCircuitName:Circuit Name Could Not Be Determined
CircuitManagerFormSearchWatermark:Type search text here...
AdditionalInfoForRecordingHeader:This will also be used and recorded as the start point of the circuit.
CircuitManagerListItemShowDirtyOnly:<show dirty circuits only>
CircuitManagerDirtyCircuitsTooltip:Dirty Circuits:
CircuitManagerListItemShowHeadlessOnly:<show circuits without header only>

Miner.Desktop.FiberManager.CircuitManagerFormV2.resx

Miner.Desktop.FiberManager.ConnectionForm.resx

ArcFMSolutionConfiguration:%S Configuration
ArcFMUtilities.NoFieldModelName:Could not find a field with the model name {0} on class {1}
Diagrams.ConductorRelate.Description:Associate Conductors and Cables to Ducts
Diagrams.ConductorRelate.Name:Associate Conductors and Cables to Ducts
Diagrams.ConductorToDuctRelate.AlreadyRelated:This association cannot be completed because this conductor is already associated to a duct in this duct bank.
Diagrams.ConductorToDuctRelate.Description:Change the search buffer to find the desired conductor and choose the duct bank that contains the desired duct, then click "Associate Conductor to Duct".
Diagrams.ConductorToDuctRelate.Name:Associate Conductors and Cables to Ducts
Diagrams.ConduitRelate.Description:Associate Conduit to Duct Bank
Diagrams.ConduitRelate.Name:Associate Conduit to Duct Bank
Diagrams.ConduitToConductorAU.Name:%A Conduit to Conductor Composite AU
Diagrams.ConduitToDuctBankRelate.Name:Associate Conduit to Duct Bank
Diagrams.ConfigureAndCreateDiagram.Name:Configure and Create
Diagrams.ConfigureAndCreateDiagram.Undo:Configure and Create Diagram
Diagrams.ConfigureAndCreateDuctBank.Name:Configure and Create
Diagrams.ConfigureAndCreateDuctBank.Undo:Configure and Create Duct Bank
Diagrams.CreateAnnotation.Name:Add Annotation
Diagrams.CreateDiagram.Name:Create Facility Floor and Walls
Diagrams.CreateDuctBanks.Name:Create Duct Banks and Ducts
Diagrams.CreateDuctBanksFromConduit.Description:Select the conduit from the available list. Click in the map to place the duct bank. Note that the list will only display conduits with configured ducts.
Diagrams.CreateDuctBanksFromConduit.Name:Create Duct Banks from Conduit
Diagrams.CreateDuctBanksFromConduit.NullConfig:Conduit configuration is null, cannot create duct bank.
Diagrams.CreateDuctBanksFromConduit.Undo:Create Duct Bank
Diagrams.CreateDuctConnector.Name:Create Duct Connections
Diagrams.CreateOppositeDuctBank.Description:To place the opposite duct bank, select the tool and click on a duct bank. The view will shift to the adjacent facility. A second click will place a mirrored copy of the bank.
Diagrams.CreateOppositeDuctBank.Name:Create Opposite
Diagrams.DeleteDuctConnector.Name:%A UFM Delete Duct Connector
Diagrams.DiagramFavorites.Name:Diagram Favorites
Diagrams.DuctBankConduitCrossAU.Name:%A UFM Conduit Cross Section AU
Diagrams.DuctBankFavorites.Name:Duct Bank Favorites
Diagrams.DuctConduitCrossAU.Name:%A UFM Duct to Conduit Synch AU
Diagrams.EditDuctBank.Description:Use the duct bank selection tool to click a duct bank. The duct bank editor form will appear. Make the wanted changes to the duct bank and select OK to commit, or Cancel.
Diagrams.EditDuctBank.Name:Edit Duct Bank
Diagrams.FacilityId.Unique:The field with model name {0} must be unique amongst all {1} features.
Diagrams.FacilityIDAU.Name:%A Populate Facility ID
Diagrams.NoClassModelName:{0}: Could not find a feature class with the model name {1}.
Diagrams.PopulateConduitBlob.Name:%A UFM Populate Conduit Blob on Duct Bank Relationship Creation AU
Diagrams.RelateConductorDuctAU.Name:%A UFM Duct To Conductor Relationship AU
Diagrams.RelateConductorToConduitAU.Name:%A UFM Conduit To Conductor Relationship AU
Diagrams.RelClassNotAttr:{0}: The relationship class is not attributed. Origin: {1}, Destination: {2}
Diagrams.ResizeDuct.HasSubducts:This duct cannot be resized because it has subducts.
Diagrams.ResizeDuct.Name:%A UFM Resize Duct AU
Diagrams.SaveFavorites.Description:To save a duct bank and ducts or a floor and walls as a favorite, select the features and click save.
Diagrams.SaveFavorites.Name:Save Favorites
Diagrams.SplitConduit.Name:%A Conduit Split AU
Diagrams.Status.Caption:%A Underground Facility Diagram Manager
Diagrams.Status.NoConduitDuctBankRelClass:No relationship class found for conduit to duct bank. Please refer to the Configuring Conduit Manager help.
Diagrams.StatusToNext.Caption:%A Underground Facility Manager
Diagrams.StatusToNext.NoUGStruct:Cannot navigate to next facility. There is no {0} at the opposite end of this conduit.
ExtensionsDialog.AboutConduitManager:Conduit Manager editing and viewing functionality to maintain \nan underground network.\n\nAvailable only with ArcFM Desktop.
ExtensionsDialog.AboutNetworkAdapter:Network Adapter analysis tools for electric geometric networks.
LocateStrategies.MessageBoxTitle:%A Locator
LocateStrategies.TableSearchFailure:An error was returned from the search. Please ensure that the search criteria is valid.
Location.Addresses:Addresses.
Location.And:AND
Location.CannotFindPath:Cannot Find Path.
Location.CannotLocate:Cannot Locate
Location.Directions:Directions
Location.EndPoint:End Point.
Location.NASolver:Network Analyst Solver
Location.NoMatch:No Match Found
Location.Route:ROUTE
Location.SameLocation:Origin and Destination are the same.
Location.SMSolver:StreetMap Solver
Location.StartPoint:Start Point.
Location.StdAddressNotSupported:Standard Address Not Supported by this Locator
MapUtilities.NoObjClassModelName:Could not find an object class with the model name {0}.
QAQCRules.EdgeQAError:Edge not connected to network.
QAQCRules.ElectricConnectRuleName:Electric Connectivity
QAQCRules.FeederInfoTraceWeightQAError:Feeder Info and Trace Weight not equal.
QAQCRules.FeederInfoTraceWeightRule:Feeder Info and Trace Weight Comparison
QAQCRules.GasConnectRuleName:Gas Connectivity
QAQCRules.JunctionQAError:Device not connected to network.
QAQCRules.NeedReducerQAError:Need non-control fitting diameter to connect to pipe {0}.
QAQCRules.NeedTransitionQAError:Need non-control fitting material to connect to pipe {0}.
QAQCRules.NoDiameterMaterialFieldModelNameQAError:Object {0} diameter or material field model name is not set.
QAQCRules.NoFeederInfoTraceWeightModelNameQAError:FeederInfo or TraceWeight field model name is not set.
QAQCRules.NonControlFittingDiameterAmountQAError:The amount of fitting diameters and connected pipes is not equal.
QAQCRules.NonControlFittingDiameterSizeQAError:Non-control fitting diameter {0} is not equal to any connected pipe diameter.
QAQCRules.NonFeederDevicePhaseQARule:Device phase designation and underlying edge phase designation do not match.
QAQCRules.NonFeederDevicePhaseRuleName:Non-Feeder Mgr Device Phase Designation
QAQCRules.NoPhaseFieldModelNameQAError:Object {0} phase field model name is not set.
QAQCRules.ServicePtQAError:Service point connected to primary conductor {0}.
Trace.Messages.NoResults:The trace task returned no elements in its results.
Tracing.Buffer.Continue:Do you want to continue?
Tracing.Buffer.CantDraw:Trace buffering has hard limit of {0} features, which is exceeded in this case. The buffer will not be drawn.
Tracing.Buffer.DrawTime:This may take a long time to draw.
Tracing.Buffer.MessageBoxTitle:%A Tracing
Tracing.Buffer.NumberElements:There are more than {0} features to buffer.
QAQCRules.DuplicateFeatureRuleName:Duplicate Feature
QAQC.NoError:No errors found.
QAQC.Preparing:Preparing for %A QA/QC. Please wait...
QAQC.SubtypeError:The value of the subtype code is not a long or short integer.
QAQC.TotalErrors:{0} error(s) found.
QAQCRules.DuplicateGeometry:This feature has the same geometry as {0}.
QAQCRules.EsriFldRulesName:ESRI Field Rules
QAQCRules.EsriRulesName:ESRI Rules
QAQCRules.RequiredFieldName:Check Required Fields
QAQCRules.PhaseOnBankName:Phase on Transformer Bank
QAQCRules.RatedKVARuleName:RatedKVA on Transformer

CustomDisplayNamers.ClassicDesignNamer:Classic %D Namer
CustomDisplayNamers.DesignPrefix:DSN
CustomDisplayNamers.NotSet:Not Set
CustomDisplayNamers.NullValue:<Null>
CustomDisplayNamers.WorkLocationPrefix:WL
CustomDisplayNamers.WorkRequestPrefix:WR
CustomDisplayNamers.CPSystemNamer:CPSystem Display Namer
CustomDisplayNamers.DistMainNamer:Distribution Main Display Namer
CustomDisplayNamers.TransformerNamer:Transformer Display Namer
CustomDisplayNamers.TransformerUnitNamer:Transformer Unit Display Namer
CustomDisplayNamers.ValveNamer:Valve Display Namer
CustomDisplayNamers.Dash:-
CustomDisplayNamers.Parenthesis:({0})
CustomDisplayNamers.RatedKVA:{0} KVA
CustomDisplayNamers.SquareBrackets:[{0}]
CustomDisplayNamers.Unknown:<?>

Cancelled:Cancelled.
ElectricExporterCorruptLine:This edge feature's geometry could not be retrieved.
ElectricExporterCorruptPoint:This junction feature's geometry could not be retrieved.
ElectricExporterElectricGeometricNetworkNull:The electric geometric network is null. Export cannot continue.
ElectricExporterFeederListEmpty:Feeder list is empty.
ElectricExporterGetRelationshipsForFeeder:Get relationships for feeder {0}
ElectricExporterGettingRelationships:Getting relationships...
ElectricExporterInitializingGetFeatures:Initializing GetFeatures
ElectricExporterInitializingGetFeederFeatures:Initializing GetFeederFeatures
ElectricExporterInitializingGetFeederRelationships:Initializing GetFeederRelationships
ElectricExporterInitializingGetRelationships:Initializing GetRelationships
ElectricExporterInitializingTraceFeeder:Initializing TraceFeeder
ElectricExporterInitializingTraceFeeders:Initializing TraceFeeders
ElectricExporterReadingAttributes:Reading attributes and geometry for {0}
ElectricExporterReadingAttributesForFeeders:Reading attributes and geometry...
ElectricExporterTracingFeeder:Tracing feeder {0}
ElectricExporterTracingFeeders:Tracing feeders...
ElectricExporterWorkspaceIsNull:The workspaces is null. {0} cannot continue.
ElectricTracerFeederEmpty:Feeder {0} appears to be empty.
ElectricTracerWarningFromJunctionNotTraced:A junction {0} on this edge was not traced. The junction or edge may have incorrect phasing, or may be de-energized.
ExporterCannotConnect:Cannot connect to Geodatabase.
ExporterCreatingExporter:Creating exporter ...
FileSenderCouldNotSave:Could not save export file: {0}
FileSenderDirectoryNotFound:Directory not found:{1}{0}
FileSenderFileIsReadonly:File is readonly{1}{0}
FileSenderNoXMLToSave:FileSender: No Xml to save.
FileSenderSavingExport:Saving export to file: {0}
PhaseRuleEdgePhasesDontMatch:Not all of the edge feature's operational phases ({0}) are found in its sources ({1}).
PhaseRuleEdgesNothingInCommon:Edge feature's operational phases ({0}) have nothing in common with it's sources ({1}).
PhaseRuleFeederInvalid:Feeder {0} has some invalid phases.
PhaseRuleFeederValid:Feeder {0} phasing is valid.
PhaseRuleFieldValueDoesNotMatchTraceWeight:ElectricTraceWeight field is inconsistent with the {0} field.{1}{0} value: {2}{1}Operational Phases: {3}
PhaseRuleFromJunctionNotFound:'From' junction not found for edge.
PhaseRuleInitializingPhaseValidation:Initializing phase validation.
PhaseRuleJunctionPhasesDontMatchEdges:Junction feature's operational phases ({0}) do not match the connected edges ({1})
PhaseRuleNotConfigured:Phase validation was not configured.
PhaseRuleRelatedPhaseExceedsFeature:Related {0} phasing exceeds the feature's operational phases.{1}Related phases: {2}{3}Operational phases: {4}
PhaseRuleValidatingPhases:Validating phases...
PipelineFailedCreatingRule:Failed to creating rule {0}
VoltageRuleCodeDoesNotMatchSource:Voltage code does not match source.{7}{8}Feeder: {0}{7}{8}Edge: {1} {2}{7}{8}Source: {3} {4}{7}{8}Voltage code: {5}{7}{8}Source Voltage code: {6}
VoltageRuleFeederIsValid:Feeder {0} Voltages are valid.
VoltageRuleFeederNotValid:Feeder {0} has some invalid Voltages.
VoltageRuleInitializingVoltageValidation:Initializing Voltage validation.
VoltageRuleLowSideConfigMissing:Warning: LowSideConfiguration field modelname, {0}, was not configured for export.{1}Transformer Voltages cannot be validated.
VoltageRuleNoFeedersFound:No feeders found.
VoltageRuleNotConfigured:Voltage validation was not configured.
VoltageRuleOperatingVoltageMissing:Warning: Operating Voltage field model name, {0}, was not configured for export.{1}Conductor Voltages cannot be validated.
VoltageRuleTransformerFailed:Warning: Transformer could not be validated due to insufficient data. Either the LowSide Voltage or the Operating Voltage of the neighboring conductors is missing.
VoltageRuleValidatingVoltages:Validating Voltages...
XslTransformationFailedLoadingXslt:Failed loading XSLT file, {0}.
XslTransformationInitializing:Initializing Xsl transformation
XslTransformationOutputFileInvalid:Output file path is invalid:{1}{0}
XslTransformationXSLFilePath:XSL file: {0}
XslTransformNoInput:XslTransform received no input.
XslTransformNotInitialized:XslTransform was not initialized. Cannot Continue.
XslTrnasformationXSLTFileNotFound:Xslt file not found:{1}{0}
XslTansformationApplyingXslTransformation:Applying Xsl transformation {0}...
GdbmAHDeleteVersionDesc:Deletes the version.
GdbmAHDeleteVersionName:Delete Version
GdbmAHEmailErrorDesc:Sends an email regarding Reconcile or Post errors.
GdbmAHEmailErrorInfoMessage:This email is an automated response from the ArcFM Geodatabase Manager Reconcile And Post service {0}:{1}{2}
GdbmAHEmailErrorName:Email Reconcile/Post Error
GdbmAHEmailErrorParamMailServer:MailServer
GdbmAHEmailErrorParamRecipient:Recipient
GdbmAHEmailErrorParamReplyTo:Reply-To
GdbmAHEmailErrorParamSender:From
GdbmAHEmailErrorParamServer:Server
GdbmAHEmailErrorParamTo:To
GdbmAHEmailErrorPost:Errors were encountered while posting version {0}.{1}{2}{3}{4}{5}{6}
GdbmAHEmailErrorPostSubject:Post Error for version {0}
GdbmAHEmailErrorReconcile:Errors were encountered while reconciling version {0}.{1}{2}{3}{4}{5}{6}
GdbmAHEmailErrorReconcileSubject:Reconcile Error for version {0}
GdbmAHPostHistoryDesc:Inserts into or updates a row in the Post History table.
GdbmAHPostHistoryName:Log To Post History
GdbmAHReconcileHistoryDesc:Inserts or updates a row in the Reconcile History table.
GdbmAHReconcileHistoryName:Log To Reconcile History
GdbmAHRunQADesc:Runs QA on inserted or updated objects in the version.
GdbmAHRunQAName:Run QA
GdbmAHRunQAParamLogFile:LogFile
GdbmAHRunQAParamQALogFile:QALogFile
GdbmAHRunQAParamStopPost:StopPost
GdbmAHSendEmailDesc:Sends a generic email via SMTP.
GdbmAHSendEmailMessage:This email is an automated response from the ArcFM Geodatabase Manager Reconcile And Post service
GdbmAHSendEmailMessageVersion:Version:
GdbmAHSendEmailName:Send Notification Email
GdbmAHSendEmailParamBody:Body
GdbmAHSendEmailParamFrom:From
GdbmAHSendEmailParamMailServer:MailServer
GdbmAHSendEmailParamRecipient:Recipient
GdbmAHSendEmailParamReplyTo:Reply-To
GdbmAHSendEmailParamServer:Server
GdbmAHSendEmailParamSubject:Subject
GdbmAHSendEmailParamTo:To
GdbmServiceOne:1
GdbmAHEmailErrorParamFilterErrors:FilterErrors
PhaseRuleRelatedPhasesAreNull:Null phase designation found on related {0}.
FileAccessValiation:Path is inaccessible.{1}{0}
FileSenderTarget:Target file: {0}{1}
InitializingPipelineRule:Initializing {0}.
CathodicProtectionCreateSystemTableAlias:Create CP System Table
CathodicProtectionCreateSystemTableInput:Gas Dataset
CathodicProtectionCreateSystemTableOutput:CP System Class
CathodicProtectionCreateSystemTableCreatingMessage:Creating {0}\{1}\{2}
CathodicProtectionCreateSystemTableCreatingShortMessage:Creating {0}
CathodicProtectionCreateSystemTableDoneMessage:Done.
CathodicProtectionCreateSystemTableError:Exception encountered while creating Cathodic Protection System table: {0}{1}
CathodicProtectionCreateSystemTableInputMessage:Input: {0}
CathodicProtectionSystemTableName:Table Name:
PopulateCPSystemTableAlias:Add CP Systems
PopulateCPSystemInputFeatureClass:Input CPSystem Feature Class
PopulateCPSystemInputNetwork:Input Geometric Network
CathodicProtectionPopulateSystemTableError:Exception encountered while populating Cathodic Protection System table: {0}{1}
CathodicProtectionCreateSystemError:Exception encountered while adding system {0}.
CathodicProtectionCreatingMofN:Creating {0}. ({1}). {2}
CathodicProtectionDoneCreatingSystems:Done creating cathodic protection systems. Created {0} systems.
CathodicProtectionProgressMsg:Creating cathodic protection systems.
CathodicProtectionTracing:Tracing cathodic protection network...
CathodicProtectionSystemNameDefault:System {0}
CathodicProtectionSystemUnprotected:{0} appears to be unprotected.
CathodicProtectionTracingDone:Adding systems...
CathodicProtectionSystemCancelled:Cancelled. Created {0} systems.
TimeRemaining:Time remaining: {0}
CathodicProtectionSystemName:Name

Replication.TrayIcon.BalloonTip.Status:Status changed to {0} at {1}
Replication.TrayIcon.BalloonTip.ProcessRunning:Process is already running. Exiting.
Replication.Status.Error:Error
Replication.TrayIcon.BalloonTip.ConfigError:Config File Error
Replication.TrayIcon.BalloonTip.CompactError:Compact Database Error
Replication.EmailSubject:ArcFM Geodatabase Replication Error Alert - {0}
Replication.ServerExitWithError:This replica has exited because of errors. Check the event log on your replication server machine, and restart the replication service.
Replication.ServerExit:This replica has exited. Check the event log on your replication server machine, and restart the replication service.
Replication.EditsExceedsThreshold:The number of edits {0}, for replica {1} exceeds the configured threshold {2}.
Replication.NoReplicas:No replicas were started. This could be because you have no enabled replicas in your configuration or have a configuration error. \nPlease check your event log and contact your administrator.
Replication.Title:%A Replication
Replication.LastUpdate:Last Update: {0}
Replication.GlobalConfigFailure:Global configuration validation failure
ReplicaSchema.AddingFields:Adding Fields for {0}
ReplicaSchema.BuildNumber:ReplicaSchemaUpdater Build: {0}
ReplicaSchema.FieldAdded:Field {0} added to object {1}
ReplicaSchema.NetworkDropped:Network dropped: {0}
ReplicaSchema.NetworkRestored:Network restored: {0}
ReplicaSchema.NoFieldsCopied:No fields were copied
ReplicaSchema.RemoveObjects:Removing objects
ReplicaSchema.CopyObject:Copying object {0}
ReplicaSchema.CopyRelClass:Copying relationship class {0}
ReplicaSchema.CreateWorkingCopy:Creating working copy of the replica...
ReplicaSchema.InvalidSubtypeDefault:Warning: failed setting default subtype value. See event log for details. Processing will continue...
AutoUpdaters.AutoAssignmentFailed:Auto assignment failed.
AutoUpdaters.AutoPhaseConductor:For the auto phase assignment to work, verify your map contains feature classes which have the 'Conductor' model name.
AutoUpdaters.CouldNotFindField:Could not find a field with the model name: {0} for feature class {1}.
AutoUpdaters.CouldNotLocateFeatures:Could not locate any features in the current map containing the model name: '{0}' {1} when attempting to execute: '{2}' for device: {3}.
AutoUpdaters.CreateSqueezeOffName:%A Create Squeeze Off
AutoUpdaters.ForAutoPhaseAssign:For auto phase assignment to execute, those feature classes with the model name {0} must also have a corresponding field model name {1} for the phase designation field to be identified.
AutoUpdaters.NonPinchablePipe:Cannot add a Squeeze Off point to a non-pinchable pipe.
AutoUpdaters.RelCreateFeederObjName:%A Relate/Create Feeder Object
AutoUpdaters.SegSplitComboName:%A Split/Relate Combo
AutoUpdaters.SplitFeederCreateName:%A Split/Create Feeder Object
AutoUpdaters.SplitRelFeederCreateName:%A Split/Relate/Create Feeder Object
AutoUpdaters.SQCheckName:%A Check for Pinchable Pipe
RelationshipUpgrader.Name:%A Relationship Property Upgrader
RelationshipUpgrader.RelationshipError:Error accessing relationship class '{0}' for row with ObjectID {1}{2}{3}
CathodicProtectionDomainUpgrade.Name:Cathodic Protection Domain Upgrade
ConnectCommand.Name:%A Connect Command
ConnectCommand.SwitchableDeviceHasTooManyEdges:A switchable device should not be connected to more than two conductors. \n\n
PopulateCPSystem.NonGasWaterNetwork:The selected network {0} is not a gas or water network.
PopulateCPSystem.ClassNotFound:The {0} feature class was not found.{1}{2}
PopulateCPSystem.ClassNotValid:The {0} feature class is not a valid Cathodic Protection System feature class.

MapperTablePopulatorLoadingDMSIDs:Loading Responder RealTime IDs for DMS...
MapperTablePopulatorLoadingOasysIDs:Loading Responder RealTime IDs for OASyS...
SendToDMSException:The request to the DMS importer encountered an exception. Check event log for details. {1}{0}
SendToDMSFailed:The following DMS service endpoint was not found: {0}
SendToDMSNotAvailable:The DMS service could not be reached: {0}
SendToDMSNoXML:Nothing to send to DMS.
SendToDMSPhaseMissing:A RealTime ID for DMS could not be added because a device unit is missing a phase designation.
SendToDMSSending:Sending to DMS...
SendToDMSSuccess:DMS import complete.
SendToDMSTimeOut:The DMS importer is not responding.
GadLogFacilityID:{1}FacilityID: {0}
GadLogFailure:FAILURE
GadLogFeederID:{1}FeederID: {0}
GadLogGenericException:GIS Adapter encountered an exception.
GadLogMessage:{0}:
GadLogMessageLine:{0}
GadLogObjectID:{1}ObjectID: {0}
GadLogPleaseUpgrade:{0}{1}The GIS Adapter appears to be out of date. Please upgrade DMS software.
GadLogStatus:DMS Status: {0}
GadLogSuccess:SUCCESS
SendToDMSFailedReadingGadLog:Failed reading GIS Adapter log. See event log for details.
SendToDMSNoGadLog:GIS Adapter completed, but returned no response.
SendToDMSEndpointNotFound:The DMS service endpoint was not found.
ConnectedTo:Connected to {0}.
FailedToConnect:Failed to establish database connection to {0}.
LoadingDmsIds:Loading Responder IDs for DMS to {0}...
LoadingOasysIds:Loading Responder IDs for OASyS {0}...
InitializingLoadDmsRealTimeIds:Initializing DMS id populator...
InitializingLoadOasysRealTimeIds:Initializing OASyS id populator...
MapperTablePopulatorDmsCount:{0} DMS devices loaded.
MapperTablePopulatorNoDmsDevices:No DMS devices found.
MapperTablePopulatorNoScadaDevices:No SCADA devices found.
MapperTablePopulatorScadaCount:{0} SCADA devices loaded.

AboutNetworkAdapter:About {0}
AoInitFailed:ArcObjects could not be initialized. An ESRI product license of Engine or greater is required.
CheckEventLog:Check Event log for details.
ConfigError:Configuration error {0}:{1} NetworkAdapterSettings element '{2}' was not found.
ConfigErrorCaption:Configuration Error
CouldNotConnect:Could not connect to the geodatabase. Check database connection properties in NetworkAdapter.exe.config
ExportFormCancelled:Export did not complete.
ExportFormConnectingToDatabase:Connecting to database:
ExportFormDone:Export finished.
ExportFormEncounteredError:Export enountered an error.{0}Please check Event log for details.
ExportFormExportInProgress:Export must be canceled before closing application.
ExportFormExportInProgressCaption:Export in Progress
ExportFormGettingAvailableFeeders:Getting a list of available feeders ...
ExportFormInitializationInProgress:Application cannot be closed during initialization.
ExportFormInitializationInProgressCaption:Initialization in Progress
ExportFormNoFeeders:Failed to load any Feeders. Feeder Manager is either unpopulated or unconfigured. Please ensure that all Feeder Manager model names are assigned.
ExportFormNothingSelected:Nothing selected.
ExportFormReady:Ready.
ExportFormRefreshingVersion:Refreshing version {0}...
ExportFormShuttingDown:Shutting down...
ExportFormStarting:Starting ...
ExportingFeeder:Exporting {0}...
FailedReadingNetworkAdapter:Failed reading the %E configuration. {0}{1}{0}Please see the %E section in the %A configuration guide for examples of NetworkAdapter.exe.config.
HelpFileMissingCaption:Missing Help File
HelpFileMissingMessage:Unable to locate the %E help file ({0}).
InvalidLicenseCaption:Invalid License
MmInitFailed:%A objects could not be initialized. A product license of Engine or greater is required.
NetworkAdapterExtensionUnavailable:A %E extension license is not available.
OptionsDialogSomeCouldNotBeLoaded:Some options could not be loaded. Check Miner Event log for details.
OptionsErrorCaption:{0} Error
OptionsErrorInLog:{0}{1}{1}{2} {0} - error caption, {1} - new line, {2} - reason
Tab:Indentation used to format status box messages. Eight space characters.

Miner.GeodatabaseUI.NetworkAdapter.ExportForm.resx

Miner.GeodatabaseUI.NetworkAdapter.OptionsDialog.resx

Miner.GeodatabaseUI.NetworkAdapter.VisibleSplitContainer.resx

Miner.Configuration.Console.AboutForm.resx

Miner.Configuration.Console.MainForm.resx

Miner.Configuration.Console.MainForm2.resx

Miner.Configuration.Console.SaveChangesDialog.resx

Miner.Configuration.Console.UnhandledExceptionForm.resx

StakerConfigurationTool_Message:Use this tool to add to the geodatabase the tables required by Designer Staker. You will need to populate the MM_STAKER_MATERIALS_LIBRARY table with your materials before creating assemblies.

GasCpToolDescription:Use this tool to view Gas Cathodic Protection systems' details at any time, or create, modify, or delete CP systems during an edit session.
ArcFMPropertiesManager:%A Properties Manager
DatabaseModelNameDomain:Model Name Domain:
DatabaseModelNamesAvailable:Model names available:
DatabaseModelNamesSelected:Model names selected:
DatabaseModelNamesTitle:Model Names
InvalidDatabaseDomainMessage:The domain '{0}' must be defined containing names of model name domains. The "Upgrade %A Solution Database" tool can create this domain for you.
AbandonInfoAbandonAndRemoveTo:Abandon and remove to:
AbandonInfoAbandonTo:Abandon to:
AbandonInfoCaption:Abandon Info
AbandonInfoOnAbandon:On Abandon:
AbandonInfoSettings:Abandon Settings
All:<All>
AllSplitPolicy:Preserve on All
ChooseASplitPolicy:Choose a split policy:
CustomRelationshipSplitPolicy:Custom Relationship Split Policy
DefaultSplitPolicy:Default
DefaultSplitPolicyDescription:Use the Preserve on Largest relationship split policy for simple relationships and the Delete Parts relationship split policy for composite relationships.
DeletePartsSplitPolicy:Delete Related Object
DeletePartsSplitPolicyDescription:Delete the related object, and delete the relationship between the object and the split feature (with composite relationships).
DeleteRelationshipSplitPolicy:Delete Relationship
DeleteRelationshipSplitPolicyDescription:Preserve the related object, but delete the relationship between the object and the split feature.
FieldAliasName:Field Alias
FieldDisplayCaption:Field Display
FieldDisplayChangeFieldOrderDescription:Set the field order using the arrows.
FieldDisplayDisplayNameObject:Display Name Object:
FieldDisplayFieldOrderCaption:%A Field Display Order
FieldDisplayPrimaryDisplayField:Primary Display Field:
FieldDisplayPrimaryDisplayFieldCaption:%A Primary Display
FieldInfoCaption:Field Info
FieldInfoFieldProperties:Field Properties
FieldModelNamesCaption:Field Model Names
FieldModelNamesFieldsTipInfo:Select a field to assign model names.
FieldName:Field Name
Fields:Fields
ModelNamesAvailable:Available :
ModelNamesCaption:Model Names
ModelNamesDomain:Model Name Domain:
InvalidDomainWarning:The domain '{0}' containing names of model name domains is not defined. You will not be able to assign new model names to the class.
ModelNamesSelected:Selected :
Multiple:<Multiple...>
No:No
None:<None>
ObjectInfoAssignAutoupdaters:Assign Autoupdaters
ObjectInfoAutoupdatersAvailable:Autoupdaters available:
ObjectInfoAutoupdatersSelected:Autoupdaters selected:
ObjectInfoCaption:Object Info
ObjectInfoCreateEditTask:Create Edit Task
EditEventIs:Edit Event: {0}
ObjectInfoExecutionOrder:Set execution order using the up and down arrows.
ObjectInfoFeatureProperties:Feature Properties
ObjectInfoMulplitAUCaption:%A Assign Autoupdaters
ObjectClassIs:Object Class: {0}
ObjectInfoObjectInformation:Object Information
ObjectInfoRules:Rules
ObjectInfoSelectAll:Select All
SubtypeIs:Subtype: {0}
ObjectInfoUnselectAll:Unselect All
PreserveOnLargestSplitPolicy:Preserve on Largest
PreserveOnLargestSplitPolicyDescription:Preserve the related object, and create a relationship with the object and the geometrically largest feature resulting from the split.
PreserveOnSmallestSplitPolicy:Preserve on Smallest
PreserveOnSmallestSplitPolicyDescription:Preserve the related object, and create a relationship between the object and the geometrically smallest feature resulting from the split.
SplitAUWarning:Note: Custom relationship split policies do not apply if split autoupdaters that remove related objects are used.
SplitPolicyInfoAllSplitPolicy:Preserve on All
SplitPolicyInfoChooseASplitPolicy:Choose a split policy:
SplitPolicyInfoCustomRelationshipSplitPolicy:Custom Relationship Split Policy
SplitPolicyInfoDefaultSplitPolicy:Default
SplitPolicyInfoDefaultSplitPolicyDescription:Use the Preserve on Largest relationship split policy for simple relationships and the Delete Parts relationship split policy for composite relationships.
SplitPolicyInfoDeletePartsSplitPolicy:Delete Related Object
SplitPolicyInfoDeletePartsSplitPolicyDescription:Delete the related object, and delete the relationship between the object and the split feature (with composite relationships).
SplitPolicyInfoDeleteRelationshipSplitPolicy:Delete Relationship
SplitPolicyInfoDeleteRelationshipSplitPolicyDescription:Preserve the related object, but delete the relationship between the object and the split feature.
SplitPolicyInfoPreserveOnLargestSplitPolicy:Preserve on Largest
SplitPolicyInfoPreserveOnLargestSplitPolicyDescription:Preserve the related object, and create a relationship with the object and the geometrically largest feature resulting from the split.
SplitPolicyInfoPreserveOnSmallestSplitPolicy:Preserve on Smallest
SplitPolicyInfoPreserveOnSmallestSplitPolicyDescription:Preserve the related object, and create a relationship between the object and the geometrically smallest feature resulting from the split.
SplitPolicyInformation:Split Policy Information
SplitPolicyInformationCaption:Split Policy Information
SplitPolicyInfoSplitAUWarning:Note: Custom Relationship Split Policies do not apply when Split Autoupdaters that save related objects are used.
SplitPolicyInfoUseSplitPolicy:Use a custom relationship split policy for this feature class.
UnregisteredProgram:UNREGISTERED PROGRAM!
UseSplitPolicy:Use a custom relationship split policy for this feature class.
WarningFieldMissing:WARNING: Attempting to set Primary Display Field, but the field with name {0} was not found on {1}. Please check your configuration.
Yes:Yes
FieldInfoFieldViewCaption:Select a field to view its properties.
RelationshipClassAliasName:Alias Name:
RelationshipClassOptionsTitle:Relationship Class Options
RelationshipClassProperties:Relationship Properties
RelationshipClassValidation:Validate Related Objects
FieldPropertyMustBeTrue:The {0} property for this field must be set to TRUE in the feature class definition for this change to take effect.
SubtypeInvisible:Making the Subtype field invisible may have adverse effects.
GasCpSystems:Gas Cathodic Protection Systems
WaterCpSystems:Water Cathodic Protection Systems
WaterCpToolDescription:Use this tool to view Water Cathodic Protection systems' details at any time, or create, modify, or delete CP systems during an edit session.
CreateCpSystems:Create Cathodic Protection Systems
EncounteredCpCreateErrors:The following errors were encountered while creating the systems:
AddWorkRequest:Add work request layer when design opens
AssignActiveWork:Assign active work function to GUs without driving CUs
CUFavorites:CU Favorites
EndingWorkLocation:Ending work location
ExtendedDataDefTable:Extended Data Definition Table:
LinearCUOptions:Linear CU Options
NonGisCuOptions:Non-GIS CU Options
StartingWorkLocation:Starting work location
StartToEndWorkLocation:Start to end work location (span)
WorkRequestLayer:Work Request Layer
DisplayNamerNotEnabled:The Primary Display Namer assigned, {0}, is not enabled for this feature class. Please check your configuration.
Subtype:Subtype:
CuFilterOptions:CU Filter Options
ShowNoneWorkFunction:Show 'None' in the Workfunction Filter
CPToolCaption:Cathodic Protection Systems
CPToolDescription:Manage and track the status of cathodic protection systems.

NotSupported:This tool is no longer supported. Please check the documentation for the new procedure.
TraceTools.ProtDev.Isolation.Message:This trace identifies every device you must open in order to truly isolate a particular location on your map.
AttributeEditor:Attribute Editor
Location.AddressSearch.Msg:Use this tool to locate a specific address or intersection on the map.
FeederManager.ConnectCommand.Cancelled:Connect cancelled by user.
FeederManager.DisconnectCommand.Cancelled:Disconnect cancelled by user.
FeederManager.DisconnectCommand.GeneralError:Unable to perform %A Disconnect
LocatorCommand.Message:This tool provides efficient and varied methods for finding features on the map. The Locator finds the specified object and related objects.
FeederManager.ConnectCommand.ToolTip:%A Connect
FeederManager.DisconnectCommand.ToolTip:%A Disconnect
TraceTools.ProtDev.NextUpstream.Message:This trace finds the immediate protective device upstream of the flag. When you place a second flag, this trace marks the previously found protective device in gray.
TraceTools.ProtDev.Palette.Message:This is the drop-down menu that provides access to the ArcFM Electric Isolation Protective Device and ArcFM Electric Next Upstream Protective Device traces.
CreateCPSystems.InvalidNetwork:{0} is only supported for gas and water networks.
TraceTools.ProtDev.Isolation.MessagTraceTools.ProtDev.Isolation.Message:%A Electric Isolation Protective Device Trace
CreateCPSystems.Caption:Create Cathodic Protection Systems
CreateCPSystems.GPAbort:Abort:
CreateCPSystems.GPError:Error:

Miner.Desktop.DesignerStaker.AssembliesUI.resx

Miner.Desktop.DesignerStaker.CategoriesUI.resx

Miner.Desktop.DesignerStaker.CreateTablesUI.resx

Miner.Desktop.DesignerStaker.FeatureClassUI.resx

Miner.Desktop.Diagrams.Underground.ConductorToDuctRelate.resx

Miner.Desktop.Diagrams.Underground.ConduitToDuctBankRelate.resx

Miner.Desktop.Diagrams.Underground.ConfigureAndCreateDiagram.resx

Miner.Desktop.Diagrams.Underground.ConfigureAndCreateDuctBank.resx

Miner.Desktop.Diagrams.Underground.CreateAnnotation.resx

Miner.Desktop.Diagrams.Underground.CreateDuctBanksFromConduit.resx

Miner.Desktop.Diagrams.Underground.CreateDuctConnector.resx

Miner.Desktop.Diagrams.Underground.CreateOppositeDuctBank.resx

Miner.Desktop.Diagrams.Underground.DiagramFavorites.resx

Miner.Desktop.Diagrams.Underground.DuctBankFavorites.resx

Miner.Desktop.Diagrams.Underground.EditDuctBankUI.resx

Miner.Desktop.Diagrams.Underground.SaveCompositeFavoritesUI.resx

Miner.Desktop.Search.LocateAndRelateLocatorControl.resx

Miner.Desktop.Search.MapProductionLocatorControl.resx

Miner.Desktop.SwizzleTool.CompactConnection.resx

Miner.Desktop.Windows.DiagramsPropertyPage.resx

SubtypeUnknown:Unknown Subtype
CuAdministrationMsg:Use this tool to manage your compatible units (CUs) as well as create and manage filters, tags and advisories.
CuFilterMsg:This tool offers a means to easily navigate compatible units (CUs) using various filters.
DuplicateCuFound:Duplicated CU's (only one copy will be migrated) Message displayed in the data migrate view when duplicate CUs have been found.
CuParentRemoved:CU Favorite '{0}' contains the compatible unit named '{1}' which was not found in the CU library.
CuRemoved:Compatible unit '{0}' code: {1} was not found in the CU library, but is still being used in some favorites. See additional log messages for more information.

FacilitySketcherMsg:This tool allows you to select a regular feature and create a corresponding design feature class (DFC) based on that feature.
AbandonCmdMsg:Use this tool to mark a feature or a set of features to be abandoned. Before abandoning a section of pipe, you must isolate it using cut points.
CloseDesignCmdMsg:Closes the currently open express design.
CommissionCmdMsg:This tool provides a means for the GIS editor to commission new features by converting design feature classes (DFCs) to regular feature classes that participate in the geometric network.
CopyFeaturesCmdMsg:Use this tool to copy design feature classes (DFCs) and their associated cost items from other express designs into the open express design.
DesignEstimateCmdMsg:This tool allows you to associate costs with the design feature classes (DFCs) in your express design or view the total cost of the current express design.
PaletteMgrCmdMessage:This tool allows you to add, edit, or delete palettes. All palettes are shared with every user. You cannot create a private palette. Before changing or deleting a palette, check with other users.
PaletteToolCaption:Palette Selector
PaletteToolMsg:Use this tool to activate a specific palette for use with Designer Express.
PaletteTooltip:Palette Selector
PostDesignCmdMsg:Use this tool to post the contents of an express design to the parent version in the geodatabase (e.g., sde.default). An express design must be reconciled before it is posted.
ReconcileDesignCmdMsg:This function reconciles the express design's parent version to the current version. If necessary, an express design may be reconciled any time after it has been created.
RemoveCmdMsg:Use this tool to mark a feature or a set of features to be abandoned and removed from the map. Before removing a section of pipe, you must isolate it using cut points.
SaveDesignCmdMsg:Use this tool to save changes to the currently open express design.
CostItemLibraryCmdMessage:Click this button to access the cost item library. There, you can add, edit or retire cost items.
CostItemLibraryCmdTooltip:Cost Item Library Manager
ShowDesignListCmdMessage:This tool allows you to either show or hide express designs. This can be helpful when, for example, you have several express designs overlapping one another and would like to hide some of them.

Miner.Desktop.DesignerExpress.Controls.ExpressDatabasePropertyPage.resx

Miner.Desktop.DesignerExpress.Controls.ExpressGeneralPropertyPage.resx

Miner.Desktop.DesignerExpress.Controls.PaletteSelector.resx

Miner.Desktop.DesignerExpress.CostItemsUI.resx

Miner.Desktop.DesignerExpress.Forms.AddCostItemDialog.resx

Miner.Desktop.DesignerExpress.Forms.ConfigurationWizard.resx

Miner.Desktop.DesignerExpress.Forms.DesignEstimateForm.resx

Miner.Desktop.DesignerExpress.PaletteItemsUI.resx

Miner.Desktop.DesignerExpress.PalettesUI.resx

DesignOptimizationCommandName:Design Optimization

Miner.Desktop.DesignOptimization.DeletePackagesForm.resx

Miner.Desktop.DesignOptimization.PlugInLayerConfigPropertyPage.resx

SheathLengthAUSheathsNotInMap:No sheath objects found in the map. Removal of slackloops will not effect sheath lengths.
ValidateTransitionPointAUMessageTitle:Transition Point Warning
FiberDrawableNodeDrawableObjectMessage:In order to be a drawable object an object must have facets or lie on facets. It must also be either a gridable container or a gridable object or both.
FiberDrawableNodeContainedByFacetsMessage:In order for an object to lie on facets it must contain the field model name: {0}. In the field that carries this model name it must have valid facet values. 0: model name
FiberDrawableNodeSelfQcErrorMsg:The error occured in row: {0} in table: {1} The error was: because the object is gridable it failed during self QC for the following reason: 0: row display name 1: table display name
FiberDrawableNodeSelfQcParentMessage:Its parent is: {0} in table: {1}. 0: row display name 1: table display name
FiberDrawableNodeSelfQcParentNotDrawableMessage:{0}its parent was not a drawable object.{1}{2}{3}{4}{5}{6} 0: root/core error message 1-6 additional error messages
FiberDrawableNodeSelfQcParentNotGridableMessage:{0}its parent was not a gridable container.{1}{2} 0: root/core error message 1-2: additional error messages
FiberDrawableNodeSelfQcParentLiesOnFacetmessage:{0}its parent neither has facets or lies on any facets.{1}{2}{3} 0: root/core error message 1-3: additional error messages
FiberDrawableNodeSelfQcLiesOnFacet:{0}it's not on any facets.{1} 0: root/core error message 1: additoinal error message
FiberDrawableNodeSelfQcFacetsIamOn:{0}it contains a facet #. The character # may not be used as a facet designator 0: root/core error message
FiberDrawableNodeSelfQcNotCorrectlyFaceted:{0}its parent neither has facets or lies on any facets that this object lies on.{1}{2} 0: root/core error message 1-2: additional error messages
FiberDrawableNodeCreateFiberDrawableNodeNoFacets:Table: {0} implemented facets and failed to properly configure facet values in row: {1}.{2} 0: table display name 1: row display name 2: additional error message
FiberDrawableNodeCreateFiberDrawableNodeFailedToConfigureIndex:Table: {0} implemented grid object and failed to properly configure it's grid index in row: {1}.{2} 0: table display name 1: row display name 2: additional error message
DirtyCircuitsCSVFilter:CSV File|*.csv
DirtyCircuitsSaveAsDialogTitle:Save Dirty Circuits Information
DirtyCircuitCsvEntry:{0},{1},{2}
DirtyCircuitGuidCol:Circuit GUID
DirtyCircuitNameCol:Circuit Name
DirtyCircuitOidCol:Circuit OID
DirtyCircuitsSaveAsMessagePlural:You are about to save an edit session with {0} dirty circuits. Would you like to save a log of these Circuits so that you can heal them at a later point?
DirtyCircuitsSaveAsMessageSingular:You are about to save an edit session with {0} dirty circuit. Would you like to save a log of this Circuit so that you can heal it at a later point?
DirtyCircuitsSaveAsMessageTitle:Dirty Circuits
DirtyCircuitsSuggestedCsvName:DirtyCircuitsList
ValidateTransitionPointAUMessage:This feature must split a fiber linear object and can not be created by itself or on the end point of the linear object. The creation of this object has been cancelled.
RenameForSortOrderAUName:ArcFM Fiber Rename for Sort Order

CPSystemSelectFeature:Select this Feature within the current System
CPSystemUpdateTestPoints:Refresh the Test History Graph
Rename:Rename
NameWithColon:{0}:
ArcFMCathodicProtection:%A Cathodic Protection
UnableToCreateSystem:Unable to create a cathodic protection system at that location. There is a feature missing. You should run the Repair Connectivity tool to repair the network.
AbbreviatedMeasuredUnits:ft
UnSufficientPriviliges_NewFolder:You do not have sufficient privileges to create new folder in Store Item Folders. Contact your database administrator for help.
UnSufficientPriviliges_Rename:You do not have sufficient privileges to rename Store Item Folders. Contact your database administrator for help.
PostQueueUI_CmdCaption:Add to Post Queue
PostQueueUI_CmdMsg:Use this tool in conjunction with Geodatabase Manager. It sends the current version to the post queue where Geodatabase Manager can post it as configured.
PostQueueUI_CmdName:Add to Post Queue
PostQueueUI_CmdTooltip:Add to Post Queue
CPSystemUpdateStatus:Refresh status for each CP System
TestsNotGraphed:{0} test(s) were not graphed due to invalid data.

AboutBox.Message:This button displays the About box where you can access information such as the product build number and contact information for Technical Support.
Location.ReverseGeocode.Message:This tool is used by the Direction Search tool and should not be added to a toolbar.
Location.ThresholdNull:Value needed for Locate Threshold
ResourceCenterCommand.Caption:ArcFM Solution Resource Center
ResourceCenterCommand.Message:Browse to the ArcFM Solution Resource Center. Here you can access all documentation as well as developer samples and white papers.
ResourceCenterCommand.NoBrowser:Default Browser not detected. Please navigate to http://resources.arcfmsolution.com in your browser.
Locator.XYSearch.Centimeters:Centimeters
Locator.XYSearch.DecimalDegrees:Decimal Degrees
Locator.XYSearch.Decimeters:Decimeters
Locator.XYSearch.Feet:Feet
Locator.XYSearch.Inches:Inches
Locator.XYSearch.Kilometers:Kilometers
Locator.XYSearch.Meters:Meters
Locator.XYSearch.Miles:Miles
Locator.XYSearch.Millimeters:Millimeters
Locator.XYSearch.NauticalMiles:Nautical Miles
Locator.XYSearch.Points:Points
Locator.XYSearch.UnknownUnits:Unknown Units
Locator.XYSearch.Yards:Yards
Diagrams.End.Caption:Close Diagram Manager
Diagrams.End.Message:Click this button to dismiss the Underground Facility Diagram Manager window.
Diagrams.End.Tooltip:Close Diagram Manager
Diagrams.Navigate.Caption:Navigate to Next Facility
Diagrams.Navigate.Message:Click this button, then click a conduit or duct bank to navigate to the next underground facility.
Diagrams.Navigate.Tooltip:Navigate to Next Facility
Diagrams.NavigateBack.Caption:Navigate to Previous Facility
Diagrams.NavigateBack.Message:Click this button to navigate to the previous underground facility. This button will remain disabled until the Navigate to Next Facility button has been used.
Diagrams.NavigateBack.Tooltip:Navigate to Previous Facility
Diagrams.Start.Message:Use this tool to view an existing diagram and open the Underground Facility Diagram Manager.
Identify.Message:Use this tool to click a portion of the map and display information about features at that location.
InvalidName.Chars:The item name '{0}' cannot contain ' or " or % characters. {0} is the attempted name
Location.ClearElementsCmd.Message:Removes all search graphics from the map. When you perform a search, ArcFM places graphics on the map to indicate the address location or the route. Click this button to clear those graphics.
Location.ClearElementsCmd.Name:Remove Search Graphics
Location.RefreshCmd.Name:Refresh Address Locators
Location.ReverseGeocode.Name:Reverse Geocode Map Location Tool
SelectDiagramCommand.Message:Use this tool to select the underground facility diagram you want to delete.
SelectDiagramCommand.Name:Select Diagram
SelectDuctBankTool.Message:Use this tool to select the duct bank you want to delete. Hold the Shift key to select multiple ducts.
SelectDuctBankTool.Name:Select Duct Bank
StoredItems.ManagerCommand.Message:This tool allows you to manage all page templates, stored displays and documents in a single user interface.
StoredItems.OptionsCommand.Message:Use these options to determine display settings for the ArcFM Stored Items list.
StoredItems.SaveAsCommand.Message:Saves the current stored item and prompts to provide a name, which may be a document, stored display or page template.
StoredItems.SaveCommand.Message:Saves the current stored item, which may be a document, stored display or page template.
StoredItems.ToolCommand.Message:Access this drop-down menu to open page templates, documents and stored displays. Recently used stored items are displayed at the top.
Trace.Excluded.Message:Use this tool to mark valves on the map that should be excluded from the valve isolation trace.
Trace.Included.Message:Use this button to mark a non-critical valve on the map that should be included in the valve isolation trace when the Critical Valve option is selected.
Trace.TempSource.Message:Use this tool to designate a gas pipe as a temporary source due to line pack. In most cases, this will be on a distribution main.
Trace.WaterSqueezeoff.Message:Use this tool to place a temporary shutoff point as a barrier. The %A Water Valve Isolation trace treats temporary shutoff points as potentially open devices and may include them in the results.
Search.General.LocateThresholdLargeValue:Value for Locate Threshold is too large.
General.BlankWithColon:{0}:

Miner.FrameworkUI.Controls.OperationGroupHost.resx

Miner.FrameworkUI.Search.LocatorControl.resx

Miner.FrameworkUI.Search.LocatorOptionsForm.resx

Miner.FrameworkUI.Search.Strategies.FeederManagerSearchUI.resx

Miner.FrameworkUI.Search.Strategies.ObjectQuerySearchUI.resx

Miner.FrameworkUI.Search.Strategies.PrimaryDisplaySearchUI.resx

Miner.FrameworkUI.Search.Strategies.XYSearchUI.resx

Miner.FrameworkUI.StoredItems.DesignerSaveAsForm.resx

Miner.FrameworkUI.StoredItems.SaveAsForm.resx

Miner.FrameworkUI.StoredItems.StoredItemControl.resx

Miner.FrameworkUI.StoredItems.StoredItemManagerForm.resx

Miner.FrameworkUI.StoredItems.StoredItemOptionsForm.resx

Miner.FrameworkUI.StoredItems.TabbedTreeForm.resx

Miner.FrameworkUI.Windows.CreateMapBookDialog.resx

Miner.FrameworkUI.Windows.IdentifyWindow.resx

LineFeedbackToolTooltip:Sketch Select By Line
RubberEnvelopeToolMessage:Sketch Select By Fence
RubberPolygonToolMessage:This tool is used by Design Optimization. It should not be added to a toolbar.
SnapToolMessage:This tool is used by Design Optimization. It should not be added to a toolbar.

GlassReportErrorText:Error building Glass Report. Please check your event log. Error message displayed when the Glass Report tool fails to generate the report.
GlassReportErrorCaption:Glass Report Error Caption for the error dialog when the glass report cannot be generated
FiberTracePropertiesUser:Use this tool to access Fiber Manager settings such as tracing style, directional tracing and default splice parameters.
FiberSelectorTraceSelectedItem:Trace Selected Item
FiberSelectorTitle:Trace Selector
FiberSelectorDisplayTraceReport:Display Trace Path Report?
FiberSelectorSelectedObjectsToTrace:Selected objects to trace:
FiberSelectorSelectedObjectTraceDirection:Selected object trace direction:
FiberSelectorSelectObjects:Select objects:
FiberSelectorSelectObject:Select object:
FiberTraceToolMessage:Use Fiber Trace to highlight an end-to-end path of connected fibers.
SpliceReportToolCaption:Splice Report
SpliceReportToolTooltip:Splice Report
SpliceReportToolMessage:This report is a useful tool for displaying all connections that exist at a splice point. A splice report is a graphical schematic of the layout of a splice.
PatchPanelConnectionReportMessage:A patch panel connection report is a graphical display of the layout of a patch panel or a series of patch panels.
OTDRTraceToolMessage:This tool traces all fibers and connections within a user-defined distance along an end-to-end path.
GlassReportCaption:Fiber Glass Report
GlassReportTooltip:Fiber Glass Report
FiberAvailabilityTraceMessage:This trace finds the shortest path between a user-defined starting and ending point in the fiber network. You can filter the trace results based on user-defined trace parameters.
FiberAllocationReportMessage:This report provides a graphical display of the connections to each fiber in a fiber optic cable. These connections may consist of other fiber optic cables, patch panel ports, or end device ports.
ClearOTDRGraphicsCommandMessage:Use this tool to clear all Fiber Trace graphics.
TraceColor:Trace Color:
FiberTwoPointTraceParametersMessage:Use this tool to define the parameters for the Fiber Two Point Trace.
FiberTracePropertiesTooltip:ArcFM Fiber Settings
FiberTracePropertiesMessage:Use this tool to set the default values for some Fiber Manager properties. The values set in the Fiber System Settings window will be the default settings for all users that connect to the database.

AboutBox.AboutCaption:About %S
AboutBox.AboutProductX:About {0}
Button.Clear:&Clear
Button.Close:Close
Button.Copy:Copy
Button.Exit:Exit
Button.Find:&Find
Button.Options:&Options...
Button.Reset:&Reset
Button.Stop:&Stop
DesignAuto.DesignTypeLabel:Design Type
DesignerUserName:Designer
DesignOptimization.RelativeCost:Relative Cost: {0} for {1}
Diagrams.AlignHorizontally.Caption:Align ducts horizontally
Diagrams.AlignHorizontally.Message:Align point features horizontally
Diagrams.AlignHorizontally.Name:HorizontalAlignment
Diagrams.AlignHorizontally.Tooltip:Aligns ducts horizontally
Diagrams.AlignVertically.Caption:Align ducts vertically
Diagrams.AlignVertically.Message:Align point features vertically
Diagrams.AlignVertically.Name:VerticalAlignment
Diagrams.AlignVertically.Tooltip:Aligns ducts vertically
Diagrams.ConduitTreeViewTool.Name:Conduit Configuration
Diagrams.CreateMapBook.Caption:Create Underground Facility Map Grids
Diagrams.CreateMapBook.EmptySelection:You must select at least one {0}.
Diagrams.CreateMapBook.Message:Create Map Grids for Underground Facility Diagrams
Diagrams.CreateMapBook.Tooltip:Create Underground Facility Map Grids
Diagrams.CreateMapBook.UndoRedo:Create Underground Facility Map Grids
Diagrams.CreateMapBookDialog.Button:Create
Diagrams.CreateMapBookDialog.Label:Map Grid Name
Diagrams.CreateMapBookDialog.MessageLabel:Map grid name is empty
Diagrams.CreateMapBookDialog.MessageTitle:You must enter a name for the map grid.
Diagrams.CreateMapBookDialog.Title:Create Map Grids
Diagrams.End.Caption:Close Underground Facility Diagram Manager
Diagrams.End.Message:Close Underground Facility Diagram Manager
Diagrams.End.Tooltip:Close Underground Facility Diagram Manager
Diagrams.Navigate.Caption:Navigate to Next Underground Facility
Diagrams.Navigate.Message:Click on a duct bank to navigate to the next underground facility
Diagrams.Navigate.NoConduit:This {0} is not associated to a conduit.
Diagrams.Navigate.Tooltip:Navigate to Next Underground Facility
Diagrams.NavigateBack.Caption:Navigate back to the last Underground Facility
Diagrams.NavigateBack.Message:Navigates back to the previous underground facility
Diagrams.NavigateBack.Tooltip:Navigate back to the last Underground Facility
Diagrams.SpaceHorizontally.Caption:Space ducts horizontally
Diagrams.SpaceHorizontally.Message:Spaces ducts equally apart horizontally
Diagrams.SpaceHorizontally.Name:SpaceHorizontal
Diagrams.SpaceHorizontally.Tooltip:Space Ducts Horizontally
Diagrams.SpaceVertically.Caption:Space ducts vertically
Diagrams.SpaceVertically.Message:Spaces ducts equally apart vertically
Diagrams.SpaceVertically.Name:SpaceVertical
Diagrams.SpaceVertically.Tooltip:Space Ducts Vertically
Diagrams.Start.Caption:Launch Underground Facility Diagram Manager
Diagrams.Start.FacilityId:The field with model name {0} cannot be null or empty. Please populate this field on all {1} features.
Diagrams.Start.Layers:This tool requires layers with the following model names assigned:
Diagrams.Start.Message:Launch Underground Facility Diagram Manager
Diagrams.Start.Tooltip:Launch Underground Facility Diagram Manager
Diagrams.Start.UniqueFacilityId:The field with model name {0} must be unique amongst all {1} features.
Diagrams.ToolBar.Caption:%A Underground Facility Manager
Diagrams.ToolBar.Name:%AUndergroundFacilityManager
ExclusionZone.ConfigurationNotInPossiblesError:The configuration for node ID {0} excludes the {1} type. This type is not in the list of potentially excludable types. Please ask your administrator to add it to the XML configuration.
ExclusionZoneUI.Apply:Apply
ExclusionZoneUI.Cancel:Cancel
ExclusionZoneUI.CheckAll:Check All
ExclusionZoneUI.Close:Close
ExclusionZoneUI.InstructionsLabel:Select feature types to be excluded from this zone.
ExclusionZoneUI.InstructionsLabelZoneSpecific:Select feature types to be excluded from {0}.
ExclusionZoneUI.MessageBoxTitle:Exclusion Zone
ExclusionZoneUI.NothingCheckedError:Please select at least one feature type to exclude from this zone.
ExclusionZoneUI.TitleCaption:Configure an Exclusion Zone
ExclusionZoneUI.TitleCaptionPreconfigure:Preconfigure Exclusion Zones
ExclusionZoneUI.UncheckAll:Uncheck All
General.BlankParameter:{0}
General.BlankWithColon:{0}:
Gps.AutoPan.Caption:&Auto Pan
Gps.AutoPan.Message:Auto Pan
Gps.AutoPan.Name:Auto Pan
Gps.AutoPan.Tooltip:Auto Pan to GPS Location
Gps.ClearGpsDisplay.Caption:&Clear GPS Display
Gps.ClearGpsDisplay.Message:Clear GPS Display
Gps.ClearGpsDisplay.Name:Clear GPS Display
Gps.ClearGpsDisplay.Tooltip:Clear GPS Display
Gps.GpsAutoRotate.Caption:Auto Rotate
Gps.GpsAutoRotate.Message:Auto Rotate
Gps.GpsAutoRotate.Name:Auto Rotate
Gps.GpsAutoRotate.Tooltip:Rotate map in GPS direction
Gps.GpsConnectionSetup.Caption:GPS C&onnection Setup...
Gps.GpsConnectionSetup.Message:GPS Connection Setup
Gps.GpsConnectionSetup.Name:GPS Connection Setup
Gps.GpsConnectionSetup.Tooltip:GPS Connection Setup
Gps.GpsDirection.East:East
Gps.GpsDirection.NE:Northeast
Gps.GpsDirection.North:North
Gps.GpsDirection.NW:Northwest
Gps.GpsDirection.SE:Southeast
Gps.GpsDirection.South:South
Gps.GpsDirection.SW:Southwest
Gps.GpsDirection.West:West
Gps.GpsDisplayOptions.Caption:Display Options...
Gps.GpsDisplayOptions.Message:Display Options
Gps.GpsDisplayOptions.Name:Display Options
Gps.GpsDisplayOptions.ToolTip:Display Options
Gps.GpsError.COMOKNoGps:Connection to the COM port was successful but no GPS device was found.
Gps.GpsError.ComPortUsed:COM port is being used by another application.
Gps.GpsError.HardwareNotFound:Hardware not found.
Gps.GpsError.InsufficientData:There is insufficient data to process.
Gps.GpsError.NoGpsDevice:Unable to detect GPS device on COM ports supported by hardware.
Gps.GpsError.NoGpsSignal:GPS signal is lost.
Gps.GpsError.NoSatellite:GPS device was found but no satellite signal is available.
Gps.GpsError.ReviewComSettings:Also review the Baud rate, Stop bits, Parity settings for the port on this dialog.
Gps.GpsError.TurnOnGps:Make sure your GPS is turned on, connected properly, and sending data.
Gps.GpsError.UnableToConnectToCom:Unable to connect to the COM port.
Gps.GpsError.UnspecifiedError:Application experienced an unspecified error.
Gps.GpsForms.Apply:Apply
Gps.GpsForms.BaudRate:Baud Rate:
Gps.GpsForms.Cancel:Cancel
Gps.GpsForms.Caption:GPS
Gps.GpsForms.CloseLog:Close Log
Gps.GpsForms.ComPort:Communication Port:
Gps.GpsForms.ConnectToGps:Connect to GPS receiver
Gps.GpsForms.CurrentLog:Current Log
Gps.GpsForms.DataBits:Data Bits:
Gps.GpsForms.DeflectionAngle:Minimum Deflection Angle:
Gps.GpsForms.DetectGpsPort:Detect GPS Port
Gps.GpsForms.DisplayOptions:Display Options
Gps.GpsForms.DisplaySymbolColor:Display Symbol Color:
Gps.GpsForms.GpsConnectionFrame:Specify your GPS connection
Gps.GpsForms.GpsConnectionSetup:GPS Connection Setup...
Gps.GpsForms.GpsDatum:Datum Used on GPS Receiver:
Gps.GpsForms.GpsDisplayOptions:Display Options
Gps.GpsForms.Interval:Interval:
Gps.GpsForms.Layer:Layer:
Gps.GpsForms.LogEstimatedPos:Log estimated position if signal is lost
Gps.GpsForms.LogSetup:Log Setup
Gps.GpsForms.OK:OK
Gps.GpsForms.OpenLog:Open Log
Gps.GpsForms.Parity:Parity:
Gps.GpsForms.SamplingDistance:Minimum Sampling Distance Between Points:
Gps.GpsForms.SamplingRate:Sampling Rate:
Gps.GpsForms.Seconds:Seconds
Gps.GpsForms.SelectFC:Select Log:
Gps.GpsForms.SimulateGps:Simulate GPS connection using point or line data
Gps.GpsForms.StopBits:Stop Bits:
Gps.GpsForms.StreamingOptions:Streaming Options
Gps.GpsForms.TestConnection:Test Connection
Gps.GpsForms.Units.Centimeters:Centimeters
Gps.GpsForms.Units.DecimalDegrees:Decimal Degrees
Gps.GpsForms.Units.Decimeters:Decimeters
Gps.GpsForms.Units.Degrees:Degrees
Gps.GpsForms.Units.Feet:Feet
Gps.GpsForms.Units.Inches:Inches
Gps.GpsForms.Units.Kilometers:Kilometers
Gps.GpsForms.Units.Meters:Meters
Gps.GpsForms.Units.Miles:Miles
Gps.GpsForms.Units.Millimeters:Millimeters
Gps.GpsForms.Units.NauticalMiles:Nautical Miles
Gps.GpsForms.Units.Points:Points
Gps.GpsForms.Units.Seconds:Seconds
Gps.GpsForms.Units.Unknown:Unknown
Gps.GpsForms.Units.Yards:Yards
Gps.GpsLog.Caption:Log Setup...
Gps.GpsLog.Message:Log Setup
Gps.GpsLog.Name:Log Setup
Gps.GpsLog.Tooltip:Log Setup
Gps.GpsLogStart.Caption:Start Streaming To Log
Gps.GpsLogStart.Message:Start Streaming To Log
Gps.GpsLogStart.Name:Start Streaming To Log
Gps.GpsLogStart.Tooltip:Start Streaming To Log
Gps.GpsLogStop.Caption:Stop Streaming To Log
Gps.GpsLogStop.Message:Stop Streaming To Log
Gps.GpsLogStop.Name:Stop Streaming To Log
Gps.GpsLogStop.Tooltip:Stop Streaming To Log
Gps.GpsMsg.Altitude:Elevation: {0} {1}
Gps.GpsMsg.Degrees:Degrees
Gps.GpsMsg.DeviceFound:GPS device found on port
Gps.GpsMsg.Heading:Heading: {0}
Gps.GpsMsg.Latitude:Lat: {0}
Gps.GpsMsg.Longitude:Long: {0}
Gps.GpsMsg.Receiving:GPS device was found and is receiving positions.
Gps.GpsPopupCommand.Caption:&GPS
Gps.GpsPopupCommand.CustomizerDesc:GPS
Gps.GpsPopupCommand.Tooltip:GPS
Gps.GpsProperties.Degrees:Degrees
Gps.GpsProperties.GeneralFrameCaption:Display Options
Gps.GpsProperties.MinDispRate:Minimum Display Rate:
Gps.GpsProperties.NumberOfTrainlingPoints:Number of Trailing Points:
Gps.GpsProperties.RotationAngle:Rotation Angle:
Gps.GpsProperties.Seconds:Seconds
Gps.GpsProperties.TabCaption:GPS
Gps.GpsStart.Caption:Open Connection
Gps.GpsStart.Message:Open Connection
Gps.GpsStart.Name:Open Connection
Gps.GpsStart.Tooltip:Open Connection
Gps.GpsStop.Caption:Close Connection
Gps.GpsStop.Message:Close Connection
Gps.GpsStop.Name:Close Connection
Gps.GpsStop.Tooltip:Close Connection
Gps.GpsZoomToLocation.Caption:Zoom to Current GPS Location
Gps.GpsZoomToLocation.Message:Zoom to Current GPS
Gps.GpsZoomToLocation.Name:Zoom to Current GPS
Gps.GpsZoomToLocation.Tooltip:Zooms to the current GPS position
Identify.All:All Layers
Identify.Caption:%A Identify Tool
Identify.Error:Please select a valid layer option in the pulldown on the Identify Window.
Identify.Error.Caption:Invalid Layer Option
Identify.Groups.Splitter:-------------------- Groups --------------------
Identify.Layer.Splitter:-------------------- Layers --------------------
Identify.Message:%A Identify Tool
Identify.Name:%A Identify Tool
Identify.NumObjectsFound:{0} object(s) identified.
Identify.Results:%A Identify Tool
Identify.Selectable:Selectable Layers
Identify.ToolTip:%A Identify Tool
Identify.Visible:Visible Layers
Identify.Window.Caption:%A Identify Tool
Identify.Window.MenuCaption:%A Identify Tool
Identify.Window.TabText:Identify Tool
InvalidName.AlreadyExists:An item named '{0}' already exists. {0} is the attempted name
InvalidName.AlreadyExistsWithOverwiteOption:An item named '{0}' already exists. Would you like to overwrite it? {0} is the name of the item
InvalidName.Chars:The item name '{0}' cannot contain ' or " characters. {0} is the attempted name
InvalidName.Empty:An item name cannot be empty.
InvalidName.Length:The item name '{0}' exceeds field length. {0} is the attempted name
LineFeedbackTool.Caption:Sketch Select By Line
LineFeedbackTool.Tooltip:Sketch a line geometry to select preconfigured start and end geometries.
LoadProfileOpUI.KnownFloorAreaLabel:Building Floor Area
LoadProfileOpUI.ProfileLabel:Load Profile Name:
Location.AddressLocator:Address Locator
Location.AddressSearch.Caption:%A Address Search
Location.Append:Append
Location.AppendResults:Append Results
Location.Centimeters:Centimeters
Location.ClearDisplay:Clear Display
Location.ClearElementsCmd.Message:Removes Location Search Graphic Elements
Location.ClearElementsCmd.Name:Location Graphics Remover
Location.Copy:Copy
Location.CopyToClipboard:Copy Address to Clipboard
Location.CostAttribute:Cost Attribute
Location.DecimalDegrees:Decimal Degrees
Location.Decimeters:Decimeters
Location.DirectionSearch.Options:%A Direction Search Options
Location.EndAddress:End Address
Location.FeaturesFound:Feature(s) Found
Location.Feet:Feet
Location.GeocodeAddress:Geocode Address
Location.GetGpsLocation:Get GPS Location Address
Location.GroupBox.Title:ESRI
Location.Inches:Inches
Location.InvalidLocator:Invalid Address Locator.
Location.Kilometers:Kilometers
Location.LocationSearch:Location Search
Location.Meters:Meters
Location.Miles:Miles
Location.Millimeters:Millimeters
Location.NauticalMiles:Nautical Miles
Location.NetworkAnalyst:Network Analyst
Location.NetworkAnalystNote:Note: Selecting this option will check out an ArcGIS Network Analyst Extension license.
Location.No:No
Location.NoLocator:No Address Locator is Available
Location.NoMatch:No Match Found.
Location.NoRouteSolver:No Route Solver is Available
Location.NoValidLocator:No Valid Locator is Available
Location.Options:Location Search
Location.Options.MainGrpBox.Text:Route Solver Settings
Location.Options.NACheckBoxText:Use Network Analyst ArcGIS Extension
Location.Options.Title:Extensions
Location.Points:Points
Location.Preferences:Preferences
Location.RefreshCmd.Caption:Refresh Address Locators
Location.RefreshCmd.Msg:Refreshes the list of available ArcGIS address locators in %A location tools
Location.RefreshCmd.Name:Refresh Locators
Location.RefreshCmd.ToolTip:Click to refresh ArcGIS address locators list
Location.Restrictions:Restrictions
Location.ReverseGeocode.Caption:Reverse Geocode Map Location Tool
Location.ReverseGeocode.Name:Reverse Geocode Tool
Location.RevGeocodeNotSupported:Reverse Geocoding Not Supported by this Locator
Location.SearchTolerance:Search Distance:
Location.SelectAddressLocator:Select Address Locator
Location.ShowAddress:Show Address
Location.ShowLocation:Show Location
Location.ShowLocation.Message:Get Location Details of Map Point.
Location.ShowLocation.Name:Show Location Tool
Location.StartAddress:Start Address
Location.StreetMap:StreetMap
Location.Tooltip.ClearSearch:Clear search text and results
Location.Tooltip.FindRoute:Find route and show directions
Location.ToolTip.GetMapPoint:Get Map Point Address
Location.Unknown:UNKNOWN
Location.UnknownUnits:Unknown Units
Location.UseHighways:Use Highways
Location.UseLocalRoads:Use Local Roads
Location.Yards:Yards
Loction.Swap:Swap start and end address
OverviewWindow.Caption:Overview
OverviewWindow.FullExtent:Full Extent
OverviewWindow.Recenter:Recenter
OverviewWindow.Scale:Scale
PhaseDesignationUI.LoadProfileMismatch:Mismatch: Load Profiles' Number of Phases
PhaseDesignationUI.MessageBox.Caption:Set Phase Designation
PhaseDesignationUI.MessageBox.EndOfMessage:Do you want to overwrite these phasing assignments?
PhaseDesignationUI.MessageBox.ListSubstring:{0} group(s) with phase {1}
PhaseDesignationUI.MessageBox.StartOfMessage:The parcel groups in this design have been assigned various phase designations:
PhaseDesignationUI.RadioOption.NotSet:Not Set
RubberEnvelopeTool.Caption:Sketch Select By Fence
RubberEnvelopeTool.Message:Select geometries by sketching a rectangular polygon.
RubberPolygonTool.Caption:Sketch Select By Polygon
RubberPolygonTool.Message:Select geometries by sketching a free-form polygon.
Search.ArcFMDisplayField.Caption:%A Display Field
Search.ArcFMDisplayField.Priority:100
Search.AttributeQuery.Caption:Attribute Query
Search.AttributeQuery.Priority:200
Search.FeederManager.Caption:Feeder Manager
Search.FeederManager.DeEnergized:De-Energized
Search.FeederManager.Priority:300
Search.FeederManager.SearchCriteria:Feeder Manager Search Criteria...
Search.General.AddToCurrentSelection:Add to &Current Selection
Search.General.AutoAddToMapSet:Auto Add to &Map Set
Search.General.AutoAddToSelection:Auto &Add to Selection
Search.General.AutoZoomToSelection:Auto &Zoom to Results
Search.General.CaseSensitive:Use &Case Sensitive Search
Search.General.CreateNewSelection:Create &New Selection
Search.General.ExactMatch:Exact Match
Search.General.IgnoreSubtypes:&Ignore Subtypes
Search.General.InvalidFieldValue:The primary display field requires a valid {0} value.
Search.General.InvalidFloat:decimal
Search.General.InvalidInteger:integer
Search.General.LocateThresholdExceeded:The Locate Results threshold of {0} has been exceeded. Do you want to continue?
Search.General.LocatorToolLabel:Locator Tool:
Search.General.MessageBoxTitle:%A Locator Tool
Search.General.NoResultsFound:No results returned.
Search.General.NumObjectsFound:{0} object(s) found.
Search.General.OptionsStatus:Modify search results options.
Search.General.SearchCancelled:Search cancelled by user
Search.General.SearchCount:Search {0}
Search.General.Searching:Searching...
Search.General.SearchWithColon:Search:
Search.General.SelectionThresholdExceeded:The Selection threshold of {0} has been exceeded. Do you want to continue?
Search.General.ShowAllTables:Show all tables
Search.General.ZoomThresholdExceeded:The Zoom threshold of {0} has been exceeded. Do you want to continue?
Search.ObjectQuery.Caption:Object Query
Search.ObjectQuery.Priority:400
Search.ObjectQueryUI.ConfigurationWarning:The %A Object Query locator has not been properly configured. Please refer to the "Configure %A" section of the %S help in ArcCatalog for information.
Search.Options.DisableThresholds:&Disable all thresholds
Search.Options.DisplayAs:Display as:
Search.Options.DisplayAsGraphics:Graphics
Search.Options.DisplayAsSelection:Selection
Search.Options.LocateThresholdSetting:&Locate Results Threshold
Search.Options.LocatorOptions:Locator Options
Search.Options.SelectThresholdSetting:Auto Selection &Threshold
Search.Options.SuppressThresholdMessages:Suppress all threshold warning &messages
Search.Options.ThresholdsCaption:Threshold Settings
Search.Options.Title:Locator Options
Search.Options.ZeroThresholdMessage:Note: A value of 0 will disable threshold checking.
Search.Options.ZoomThresholdSetting:Auto Zoom T&hreshold
Search.XYCoordinates.Caption:XY Coordinates
Search.XYCoordinates.Priority:500
Search.XYCoordinatesUI.Distance:Search Distance:
Search.XYCoordinatesUI.MissingParameterDistance:distance
Search.XYCoordinatesUI.MissingParameterMessage:Please enter a valid {0} parameter.
Search.XYCoordinatesUI.MissingParameterX:X
Search.XYCoordinatesUI.MissingParameterY:Y
Search.XYCoordinatesUI.X:X:
Search.XYCoordinatesUI.Y:Y:
SelectDiagramCommand.Caption:Select Diagram
SelectDiagramCommand.Message:Selects the current diagram
SelectDiagramCommand.Name:Select Diagram command
SelectDiagramCommand.Tooltip:Select Diagram
SelectDuctBankTool.Caption:Select Duct Bank
SelectDuctBankTool.Message:Selects all the ducts and the duct bank itself. Hold Shift key to keep previous selection.
SelectDuctBankTool.Name:Select Duct Bank Tool
SelectDuctBankTool.Tooltip:Select Duct Bank
SnapTool.Caption:Snap Cursor To Point
SnapTool.Message:Snaps the cursor to preconfigured points while the mouse is moving.
StoredItem.CopyCommand.InvalidSelection:Cannot copy items of mixed types
StoredItem.CutCommand.InvalidSelection:Cannot cut items of mixed types
StoredItems.CopyCommand.Caption:Copy
StoredItems.DeleteCommand.Caption:Delete
StoredItems.DeleteCommand.ConfirmMessage:Are you sure you want to permanently delete the selected item(s)?
StoredItems.DeleteCommand.ConfirmTitle:Confirm Delete
StoredItems.DeleteCommand.FolderIsRootMessage:Cannot delete top level folder.
StoredItems.DeleteCommand.FolderIsRootTitle:Delete Folder
StoredItems.DeleteCommand.FolderNotEmptyMessage:You must clear the contents of the folder before deleting it.
StoredItems.DeleteCommand.FolderNotEmptyTitle:Delete Folder
StoredItems.DesignPageTemplate:Design Page Template
StoredItems.DesignPageTemplate.FolderName:Design Page Templates
StoredItems.DesignSaveAs.Title:Save Design Page Template...
StoredItems.Document:Document
StoredItems.Documents:Documents
StoredItems.GenericArcFMTitle:%A Stored Items
StoredItems.InvalidStoredItemState:Stored item folders do not exist. Please see the event log for details.
StoredItems.ItemRenamedMessage:The selected item's name was not current and has been updated from '{0}' to '{1}'. 0 is old name, 1 is new name.
StoredItems.LockRetry:The items you are editing have been changed by another user. Your change has not been saved, please try again.
StoredItems.Manager.CloseWithoutSavig.Title:Close without saving?
StoredItems.Manager.CloseWithoutSaving.Message:Are you sure you want to close without saving your changes?
StoredItems.Manager.Title:Stored Items Manager
StoredItems.ManagerCommand.Caption:Stored Items Manager
StoredItems.ManagerCommand.Message:Manage Stored Items
StoredItems.ManagerCommand.ToolTip:Stored Items Manager
StoredItems.NewFolderCommand.Caption:New Folder
StoredItems.NewFolderCommand.DefaultFolderName:New Folder
StoredItems.OpenCommand.Caption:Open
StoredItems.Options.AutoExpandAll:All Levels
StoredItems.Options.AutoExpandGroup:Auto Expand Folders
StoredItems.Options.AutoExpandOne:First Level Only
StoredItems.Options.AutoExpandTwo:First Two Levels
StoredItems.Options.DefaultItem:Default Stored Item:
StoredItems.Options.DisplayGroup:Display
StoredItems.Options.DocumentTab:Document Tab
StoredItems.Options.GeneralTab:General
StoredItems.Options.MRU:Most Recently Used List
StoredItems.Options.MRUMaxSize:Maximum size of Most Recently Used List:
StoredItems.Options.NoAutoExpand:None
StoredItems.Options.OneTabMinimum.Caption:Stored Items - Cannot Remove All Tabs
StoredItems.Options.OneTabMinimum.Message:At least one Stored Items tab must be left visible.
StoredItems.Options.PageTemplateTab:Page Template Tab
StoredItems.Options.SettingsGroup:Settings
StoredItems.Options.StoredDisplayTab:Stored Display Tab
StoredItems.Options.Title:Stored Items Options
StoredItems.OptionsCommand.Caption:Options...
StoredItems.OptionsCommand.Message:Set Options for Stored Items
StoredItems.OptionsCommand.Tooltip:Stored Items Options
StoredItems.PageTemplate:Page Template
StoredItems.PageTemplates:Page Templates
StoredItems.PasteCommand.Caption:Paste
StoredItems.PermissionsErrorMessage:Cannot write to {0} {1} table. Check your database permissions. {0} is "User" or "System" and {1} is type (eg. Stored Display)
StoredItems.PermissionsErrorTitle:Unable to write to table
StoredItems.RemoveInvalidItemPrompt:The selected item no longer exists. Would you like to remove it?
StoredItems.RenameCommand.Caption:Rename
StoredItems.Renaming.AddMruNumber:{1} - {0} 0 - Item Name, 1 - Item MRU Number
StoredItems.Renaming.AddUniqueNumber:{0} ({1}) 0 - Item Name, 1 - Unique Number
StoredItems.Renaming.AddUserName:{0} ({1}) 0 - Item Name, 1 - UserName
StoredItems.Save.Title:Save Stored Items
StoredItems.SaveAs.ItemTypeLabel:Item type:
StoredItems.SaveAs.NameLabel:Name:
StoredItems.SaveAs.NewFolderButton:Create Folder
StoredItems.SaveAs.NewItemText:New Item
StoredItems.SaveAs.SaveInLabel:Save in:
StoredItems.SaveAs.System:System
StoredItems.SaveAs.Title:Save Stored Items As...
StoredItems.SaveAs.User:User
StoredItems.SaveAsCommand.Caption:Save As...
StoredItems.SaveAsCommand.Message:Save Stored Items
StoredItems.SaveAsCommand.ToolTip:Save Stored Items As...
StoredItems.SaveCommand.Caption:Save
StoredItems.SaveCommand.Message:Save the Current Stored Item
StoredItems.SaveCommand.ToolTip:Save Stored Items
StoredItems.SaveFailMessage:Error saving {0} "{1}" 0 is type (Stored Display, for instance) 1 is name of item.
StoredItems.SaveFailMessageTitle:Save Failed
StoredItems.StoredDisplay:Stored Display
StoredItems.StoredDisplays:Stored Displays
StoredItems.StoredItemsClassic.ToolbarName:%A Stored Items Classic
StoredItems.StoredItemsMenu.Name:Stored Items
StoredItems.ToolCommand.Caption:Stored Items
StoredItems.ToolCommand.ComboBoxText:Stored Items
StoredItems.ToolCommand.Message:Access and Edit Stored Items
StoredItems.ToolCommand.ToolTip:Stored Items
SystemUserName:System
Tools.Options.Caption:%V Options...
Tools.Options.Message:%V Options
Tools.Options.Name:Clear Results
Tools.Options.ToolTip:ArcFM Viewer Options
Trace.ClearExcluded.Caption:Clear Excluded Valve
Trace.ClearExcluded.Message:Clear Excluded Valve
Trace.ClearExcluded.Name:Clear Excluded Valve
Trace.ClearExcluded.Tooltip:Clear Excluded Valve
Trace.ClearIncluded.Caption:Clear Included Valve
Trace.ClearIncluded.Message:Clear Included Valve
Trace.ClearIncluded.Name:Clear Included Valve
Trace.ClearIncluded.Tooltip:Clear Included Valve
Trace.ClearResults.Caption:Clear All
Trace.ClearResults.Message:Clear All
Trace.ClearResults.Name:Clear All
Trace.ClearResults.ToolTip:Clear All
Trace.ClearTemporary.Caption:Clear Temporary
Trace.ClearTemporary.Message:Clear Temporary
Trace.ClearTemporary.Name:Clear Temporary
Trace.ClearTemporary.Tooltip:Clear Temporary
Trace.ClearTempSource.Caption:Clear Temporary Source
Trace.ClearTempSource.Message:Clear Temporary Source
Trace.ClearTempSource.Name:Clear Temporary Source
Trace.ClearTempSource.Tooltip:Clear Temporary Source
Trace.DistCircuit.Caption:%A Electric Distribution Trace
Trace.DistCircuit.Message:%A Electric Distribution Trace
Trace.DistCircuit.Name:%A Electric Distribution Trace
Trace.DistCircuit.ToolTip:%A Electric Distribution Trace
Trace.DownProtDev.Caption:%A Electric Downstream Protective Device Trace
Trace.DownProtDev.Message:%A Electric Downstream Protective Device Trace
Trace.DownProtDev.Name:%A Electric Downstream Protective Device Trace
Trace.DownProtDev.ToolTip:%A Electric Downstream Protective Device Trace
Trace.Downstream.Caption:%A Electric Downstream Trace
Trace.Downstream.Message:%A Electric Downstream Trace
Trace.Downstream.Name:%A Electric Downstream Trace
Trace.Downstream.ToolTip:%A Electric Downstream Trace
Trace.Excluded.Caption:Exclude Valve
Trace.Excluded.Message:Exclude Valve
Trace.Excluded.Name:Exclude Valve
Trace.Excluded.Tooltip:Exclude Valve
Trace.GasCP.Caption:%A Gas Cathodic Protection Trace
Trace.GasCP.Message:%A Gas Cathodic Protection Trace
Trace.GasCP.Name:%A Gas Cathodic Protection Trace
Trace.GasCP.ToolTip:%A Gas Cathodic Protection Trace
Trace.GasIS.Caption:%A Gas Valve Isolation Trace
Trace.GasIS.Message:%A Gas Valve Isolation Trace
Trace.GasIS.Name:%A Gas Valve Isolation Trace
Trace.GasIS.ToolTip:%A Gas Valve Isolation Trace
Trace.GasPS.Caption:%A Gas Pressure System Trace
Trace.GasPS.Message:%A Gas Pressure System Trace
Trace.GasPS.Name:%A Gas Pressure System Trace
Trace.GasPS.ToolTip:%A Gas Pressure System Trace
Trace.GasSQ.Caption:%A Gas Squeeze Off Trace
Trace.GasSQ.Message:%A Gas Squeeze Off Trace
Trace.GasSQ.Name:%A Gas Squeeze Off Trace
Trace.GasSQ.ToolTip:%A Gas Squeeze Off Trace
Trace.GasSqueezeoff.Caption:Squeeze Off
Trace.GasSqueezeoff.Message:Squeeze Off
Trace.GasSqueezeoff.Name:Squeeze Off
Trace.GasSqueezeoff.Tooltip:Squeeze Off
Trace.GasSystem.Caption:%A Gas System Trace
Trace.GasSystem.Message:%A Gas System Trace
Trace.GasSystem.Name:%A Gas System Trace
Trace.GasSystem.ToolTip:%A Gas System Trace
Trace.Included.Caption:Include Valve
Trace.Included.Message:Include Valve
Trace.Included.Name:Include Valve
Trace.Included.Tooltip:Include Valve
Trace.IsolationIncidents.Caption:Isolation Incidents
Trace.IsolationIncidents.Message:Isolation Incidents
Trace.IsolationIncidents.Name:Isolation Incidents
Trace.IsolationIncidents.Tooltip:Isolation Incidents
Trace.Messages.ClickEdge:Click an edge feature to begin trace.
Trace.Messages.DisplayTraceResults:Display trace results...
Trace.Messages.NoResults:The trace task returned no elements in its results.
Trace.Messages.PerformTrace:Performing {0}...
Trace.ParentSources.Caption:%A Electric Parent Sources Trace
Trace.ParentSources.Message:%A Electric Parent Sources Trace
Trace.ParentSources.Name:%A Electric Parent Sources Trace
Trace.ParentSources.ToolTip:%A Electric Parent Sources Trace
Trace.TempSource.Caption:Temporary Source
Trace.TempSource.Message:Temporary Source
Trace.TempSource.Name:Temporary Source
Trace.TempSource.Tooltip:Temporary Source
Trace.Upstream.Caption:%A Electric Upstream Trace
Trace.Upstream.Message:%A Electric Upstream Trace
Trace.Upstream.Name:%A Electric Upstream Trace
Trace.Upstream.ToolTip:%A Electric Upstream Trace
Trace.WaterCP.Caption:%A Water Cathodic Protection Trace
Trace.WaterCP.Message:%A Water Cathodic Protection Trace
Trace.WaterCP.Name:%A Water Cathodic Protection Trace
Trace.WaterCP.ToolTip:%A Water Cathodic Protection Trace
Trace.WaterIS.Caption:%A Water Valve Isolation Trace
Trace.WaterIS.Message:%A Water Valve Isolation Trace
Trace.WaterIS.Name:%A Water Valve Isolation Trace
Trace.WaterIS.ToolTip:%A Water Valve Isolation Trace
Trace.WaterPS.Caption:%A Water Pressure System Trace
Trace.WaterPS.Message:%A Water Pressure System Trace
Trace.WaterPS.Name:%A Water Pressure System Trace
Trace.WaterPS.ToolTip:%A Water Pressure System Trace
Trace.WaterSQ.Caption:%A Water Temporary Shutoff Trace
Trace.WaterSQ.Message:%A Water Temporary Shutoff Trace
Trace.WaterSQ.Name:%A Water Temporary Shutoff Trace
Trace.WaterSQ.ToolTip:%A Water Temporary Shutoff Trace
Trace.WaterSqueezeoff.Caption:Temporary Shutoff
Trace.WaterSqueezeoff.Message:Temporary Shutoff
Trace.WaterSqueezeoff.Name:Temporary Shutoff
Trace.WaterSqueezeoff.Tooltip:Temporary Shutoff
Trace.WaterSystem.Caption:%A Water System Trace
Trace.WaterSystem.Message:%A Water System Trace
Trace.WaterSystem.Name:%A Water System Trace
Trace.WaterSystem.ToolTip:%A Water System Trace
Trace.ZoomToResults.Caption:Zoom to Results
Trace.ZoomToResults.Message:Zoom to Results
Trace.ZoomToResults.Name:Zoom To Results
Trace.ZoomToResults.ToolTip:Zoom To Results
TraceUpstream.Caption:%A Electric Upstream Trace
TreeViewTool.RemoveFromSelection:&Remove From Selection
TreeViewTool.RemoveFromTree:R&emove From List
XMLLoginObject.BadPassword:Unable to login. The database may be unavailable, or your user name and password may be invalid.
XMLLoginObject.Cancel:Cancel
XMLLoginObject.DatabaseDoesNotExist:Unable to login. The database ({0}) does not exist.
XMLLoginObject.EnterPassword:Unable to login. Please enter a password.
XMLLoginObject.EnterUserName:Unable to login. Please enter a user name.
XMLLoginObject.GeneralCaption:Login
XMLLoginObject.NoSpecialCharacters:Unable to login. User names cannot contain ' or "" characters or spaces.
XMLLoginObject.OK:OK
XMLLoginObject.Password:&Password:
XMLLoginObject.SpecifyDatabase:Unable to login. Please specify a server and/or a database.
XMLLoginObject.StakerCaption:Designer Staker
XMLLoginObject.UserName:&User Name:
XMLLoginObject.ViewerCaption:ArcFM Viewer for ArcGIS Engine
Commands.InsertPicture.Caption:Picture...
Commands.InsertPicture.Message:Insert a picture
Commands.InsertPictures.ToolTip:Picture...
Search.General.LocateThreshold:Locate Threshold
Search.General.LocateThresholdLargeValue:Value for Threshold is too large
Commands.InsertPicture.Operation:insert picture
Location.QueryTooLong:Unable to process search for field {0}. Query must be limited to 255 characters.
Trace.ProtDev.Isolation.Caption:%A Electric Isolation Protective Device Trace
Trace.ProtDev.Isolation.Message:%A Electric Isolation Protective Device Trace
Trace.ProtDev.Isolation.Tooltip:%A Electric Isolation Protective Device Trace
Trace.ProtDev.NextUpstream.Caption:%A Electric Next Upstream Protective Device Trace
Trace.ProtDev.NextUpstream.Message:%A Electric Next Upstream Protective Device Trace
Trace.ProtDev.NextUpstream.Tooltip:%A Electric Next Upstream Protective Device Trace
Trace.UpProtDev.Caption:%A Electric Upstream Protective Device Trace
Trace.UpProtDev.Message:%A Electric Upstream Protective Device Trace
Trace.UpProtDev.Name:%A Electric Upstream Protective Device Trace
Trace.UpProtDev.ToolTip:%A Electric Upstream Protective Device Trace